User manual GENUIS TVGO DVB-T02 PRO

[. . . ] When the hardware is connected, you can start the software installation. We highly recommend you use an outdoor antenna for better reception. 2 English 2. 2 Software installation The TVGo DVB-T02PRO installation includes the application and driver; just follow the sections below to install the software. After the computer and TVGo DVB-T02PRO are connected, the following window appears. Click on "Cancel" to install the driver later. Put into the software disc into your CD-ROM drive. Select Driver Setup to install driver and application. [. . . ] It depends on the availability of the channel transmitter and program. To scan channels, change image capture properties, or change the path of recording and Time-shift. Frame capture Enable video sub-screen To program scheduled recording or change the recording path, select this icon on the control panel. TV channel preview My Favorite Programs 8 English Open TeleText window of TV program Activate EPG (Electronic Program Guide) ~ Select TV channels Online Help Back to previous TV channel TV channel signal strength status Stereo Status 3. 3 Image Capture Enter setting and select Image capture page to set the frames per capture and interval between each frame. Total Frames: You can use the left mouse button to change the frames you want to capture each time. Interval: You can use left mouse button to change the capture interval (seconds) of each frame. Default: You can click this button to restore the default value stored on the system. Frame Capture Path: You need to specify your location to store the captured frames in this field. If the settings of image capture are correct, you can click "OK" to save your setting and exit. Or click "Cancel" button to give up all the changes you made and exit. 9 English Select to take an image capture of the program you are watching. You can click "Capture" again to capture another frame. You can delete the selected frames by clicking "Delete". Or, you can use "Delete All" to delete all the frames you capture. Once you finish the selection, you can click "Save" to save the capture frames or "Close" without saving. You can also change the image saving path by using the "Path" entry field section. 10 English 3. 4 Electronic Program Guide If the program supports EPG (Electronic Program Guide), select the small icon Notice: It depends on the availability of the channel transmitter and program. You can choose a different program by pulling down the sub-menu and make the selection. You can also check the programs you want to add into schedule recording. on the control panel. After you click "Schedule Record", the system will pop up a message to let you know if you did it successfully. 3. 5 Time-shift When you are watching a real time program and need to be out for a while, select the Time-shift button on the control panel to start recording the program from this point of time. 11 English When you are back, you can use the left mouse button to click on the scroll bar to select the point you want to watch. Or you can also use Back-ward button speed and up to x32 speed. Use Stop button click Stop button or Forward button to review the TV program from x2 to bring the player speed to normal. If you want to deactivate the Time-shift, you can again to do it. For VISTA users, when you activate this feature you will see the following pop-up menu to ask the permission to access the files. Select "Allow" to continue. 3. 6 TeleText If the TV program supports TeleText, select the small icon on the numerical panel. Note: It depends on the availability of the channel transmitter and program. You can click Page-Up or Page-Down to go up or down one page. Just click Pause to stay on the current page. [. . . ] Duration: The recording period of this schedule-recording job. Status: The state (wait / finished) of this schedule-recording job. Times: It displays how many times this schedule-recording job will take (Single/Multiple) If the settings of all schedule-recording jobs are correct, you can click "OK" to save all the changes and exit. Or click "Cancel" to give up all the changes you made and exit. Note: TVGo Player supports auto Power On for scheduled recording. [. . . ]