User manual GENUIS V1200

[. . . ] English WEEE Warning Message Symbol for Separate Collection in European Countries This symbol indicates that this product is to be collected separately. The following apply only to users in European countries: This product is designated for separate collection at an appropriate collection point. For more information, contact the retailer or the local authorities in charge of waste management. FCC STATEMENT This device complies with Part 15 of the FCC Rules. [. . . ] Half press the shutter button to focus the subject. The frame turns green to indicate focus is set. Press the shutter button to take the shot. 38 Note When Intelligent Scene function is enabled, icons will be displayed even in Guideline, None Display modes and when the shutter button is half pressed. The table below shows the modes supported by Intelligent scene: Icon Intelligent Scene Modes Portrait Description This mode is set when a face is detected. This mode is set when: · There is no face detected. · The focus distance is more than 1. 5 meters. · The EV setting is greater than 11 or 10. 5. This mode is automatically set when sunset lighting is detected. This mode is set when: · There is no face detected · The focus distance is within the macro range. This mode can only be detected when you half press the shutter button. This mode is set when the EV setting greater than 2. 5. Landscape Sunset Macro Backlight Backlight Portrait This mode is set when a face is detected with an EV setting greater than 2. 5. 39 Icon Intelligent Scene Modes Description This mode is set when: · There is no face detected. · The focus distance is more than 1. 5 meters. · The EV setting is lower than 5 or 4. 5. This mode is set when a face is detected with an EV setting lower than 5 or 4. 5. Night Scene Night Portrait 40 Using Blink Detection Mode The Blink Detection mode tracks faces and determines captured image that contain subjects with blinked eyes. After shooting, when the camera detects that the subject blinked an eye, a menu selection appears to ask the user whether to save the image or not. This feature saves time in managing photos to be stored or deleted from the memory. To activate Blink Detection 1. Select from the Scene Mode submenu. 307 12M Detected faces are framed. Half press the shutter button to focus the subject. The frame turns green to indicate focus is set. Press the shutter button to capture the image. The image is automatically saved unless the camera detects that the subject blinked an eye. In this case, the screen on the right is displayed: 4. Select Save Image to save or Cancel to disregard. Save image Cancel 41 Using Aperture Priority Mode With Aperture Priority mode, users can adjust the aperture value and the camera automatically sets the shutter speed to match the brightness. To activate Aperture Priority 1. [. . . ] Folder names begin with a 3-digit number from 100 to 999 and followed by "DICAM" or "_AUCT" or "_UTUBE". If new files are saved, a new folder named in sequence will be automatically created. File Naming File names begin with "DSCI" and followed by a 4-digit number that increases in sequence. File numbering starts from 0001 when a new folder is created. If the highest folder number is 999 and the highest file number exceeds 9999, the camera will display the warning message "Folder cannot be created. " When this happens, try one of the following ways: · Reset the file number. [. . . ]