User manual GEONAUTE SYNKRON 200Y

[. . . ] K ­ Hole for wall mounting For hanging the main unit on a wall. L ­ SEARCH control For resetting communication with the sensor. A - Three-line display Enables easy reading of weather forecasts, indoor temperature, remote temperature and clock calendar. B - MODE/SETTING control Changes the display mode of the clock and alternates between time/date settings. C - Up ( ) control Increases the value of a setting. ) D - Down control ( Decreases the value of a setting. [. . . ] · The guarantee does not cover batteries or cracked or broken casings where signs of a blow are evident. USE ­ PRECAUTIONS FOR USE Description of normal conditions of use The weather station is designed to measure the indoor temperature (at the receiver) and outdoor temperature (at the wireless sensor). The following checklist must be followed in the right order. Each item on the list is important. Place all the items on the same table, away from any sources of interference (televisions, cell phones etc. ). 1- Insert the batteries in the sensor according to the indicated polarities. 1. Two new LR6-AA 1. 5 V batteries are included for use with the station. The batteries are not installed in the device. Two new LR6-AA 1. 5 V batteries are included for use with the sensor. The batteries are not installed in the device. One cross-tip screwdriver for the screws of the sensor (precision model) (not included). The SYNKRON 200Y station, with battery cover open. The sensor, with battery cover open on its table stand 6. Use the memory function (MIN/MAX) to display in this window the minimum and maximum temperatures, which have been saved automatically. The respective indicators MAX and MIN are displayed. The icon on the right-hand side indicates the status of the main unit's reception of data transmitted by the remote sensor. Three shapes may be displayed: The device is in search mode The temperature readings are being saved No signal A low battery indicator alerts you when the batteries of the remote sensor are low. Outdoor temperature (remote sensor) Measuring range of the outdoor temperature:-20. 0°C to +60. 0°C Measuring accuracy +/- 0. 5°C Transmission frequency: 433 MHz Transmitting distance: 30 meters maximum Interval between 2 outdoor temperature measurements: around 78 seconds Press on the °C/°F button to change the units of the temperature display This window displays the indoor temperature in Celsius (°C) or in Fahrenheit (°F), as measured by the main unit. Use the memory function (MIN/MAX) to display in this window the minimum and maximum temperatures, which have been saved automatically. The respective MAX and MIN indicators are displayed. A low battery indicator alerts you when the batteries of the main unit are low. Measuring range of the indoor temperature: -5. 0°C to +50. 0°C Measuring accuracy +/- 0. 5°C Indoor temperature (at the station) The maximum and minimum temperatures are automatically saved as soon as they are measured. To display the maximum temperature, press once on the MIN/MAX button. Press on the Min/Max button again to display the minimum temperature. Repeat the same procedure to return to the current temperature display. [. . . ] To stop the alarm, you can press on any button. · Setting the alarm To set the alarms: 1. The time of the last alarm to be set will be displayed. If you have not set the alarm before, the time displayed will be 0 : 00. If the alarm is not on, - : -- will be displayed. [. . . ]