User manual GEONAUTE SYNKRON 500A

[. . . ] It is no longer designed for arbitrating competition or to be used for any commercial purpose. Stopwatch indicator Rhythm indicator 12 13 Restrictions on use / guidelines governing use : · If you do not respect the following precautions, you risk losing the Decathlon. The stopwatch is classified as "water resistant". be used in · Waterproof design :is water-resistant in rain or water spray. But it is It can thereforein cases of humid conditions and not waterproof immersion, nor is it designed to be used under water. [. . . ] You must make the screen corresponding to the desired function appear in order to use or set it. Modes Operating problems: Recycling: 1 Time/Date Mode (TIME) If you encounter a problem with the read-out please check the batteries first. The `crossed out dustbin' sign means that this product and its batteries cannot be thrown out with domestic waste. When you have finished with them, drop them at an authorised collection point so they can be recycled. This gesture will go towards protecting the environment and your health. TIME Initial settings AM:12:0143 TH12. 04 Initialization : In case of display problems or significant dysfunctions, press the 4 buttons simultaneously (START/STOP MODE, RECALL, SPLIT/RESET) to reset the stop, watch (RESET) Replacing the battery is done by unscrewing the back cover a quarter turn, using a coin, for example. Inserting the battery is done according to the following diagram. Make sure the polarities are correctly placed. Remember to protect the environment and dispose of your batteries or your used product in a place where they can be recycled. The settings for time, date, TIMER, PACER are explained in the sections dedicated to the different modes. START/STOP : loud beep RECALL : to enter the setting mode SPLIT/RESET : to go to 12/24h mode MODE : go to the following mode Display ·Top line ::Time - Bottom line : Day, Week, and Date The reference "Time" will appear in this mode at the bottom left of the screen. The symbol for the daily alarm is displayed if the function is selected (see corresponding chapter). A brief display on the middle line (Time) indicates that you have entered this mode. time is displayed in Anglo-Saxon mode (0-12 or European mode · The hours) on the top line. Going from one to hours AM/PM)donein by pressing the (0-24 the other is SPLIT/RESET button. On the bottom line, the date in day week-month format, day of the month (time in AngloSaxon mode). When the stopwatch has stopped, started/stopped the START/STOP time · The stopwatch isbe accumulated ifby pressingSTART/STOP again button. Severalmeameasurements can you press between each surement. · When the stopwatch is going, you can display the intermediate time measurements and lap times on the corresponding lines by pressing repeatedly on the SPLIT/LAP button. Each time you press, the intermediate time counter goes to the next measurement. Once it has reached number 10, the counter flashes to signal that the memory is full. PACER PACER 15 · · When the stopwatch has stopped (START/STOP), the last lap time is put in the memory. the first 10 intermediate times and lap times are memorized. When using the stopwatch, They can be recalled whether the stopwatch is going or not by pressing the RECALL button. The order of reading is different depending on whether the stopwatch is functioning or not. the stopwatch is · Ifpressing RECALLfunctioning : you will make the values already put into the memory By repeatedly, scroll in the following order : The fastest lap time (FAST) The slowest lap time (SLOW) The last lap time (x) The next to last lap time (x-1) . . . the 1st lap time (1) If the stopwatch is not functioning : By pressing RECALL repeatedly, you will make the values already put into the memory scroll in the following order : The fastest lap time (FAST) The slowest lap time (SLOW) The FIRST lap time (1) The SECOND lap time (2) . . . the next to last lap time (x-1) the last lap time (x) START/STOP : start / stop the pacer RECALL : no action SPLIT/RESET : to increase the frequency of the pacer MODE : go to the following mode Display ·Top line ::PACER - Bottom line: pacer frequency will flash the screen in this mode. · The screensymbol willthe word ifPACER at the top ofcorresponding mode). [. . . ] The indication of the set value will flash to indicate that you have entered the setting mode. Press repeatedly on the SPLIT/RESET button to change the parameter to set following the sequence . . . Hour-minutes-seconds. . . When one of the elements flashes, press the START/STOP button to make the numbers scroll until you reach the desired value. Press RECALL again to leave the setting mode. [. . . ]