User manual GEONAUTE WATCH CHRONO 300

[. . . ] This guarantee does not cover damage resulting from repairs carried out by parties not authorized by DECATHLON. The guarantees contained here replace all other guarantees including the implicit guarantee of fair and trade quality and/or adaptation to use. [. . . ] detergents or soap, which may a and do not use · the materialsslightly damp, cause to deteriorate. · Keep the device away from any strong electrical field or area of static electricity. dysfunction can be claimed in the context of the Decathlon guarantee, with the exception of hidden defects. Operating problems: Recycling: If you encounter a problem with the read-out please check the batteries first. The `crossed out dustbin' sign means that this product and its batteries cannot be thrown out with domestic waste. When you have finished with them, drop them at an authorised collection point so they can be recycled. This gesture will go towards protecting the environment and your health. Settings for the time and date are explained in the sections dedicated to the different modes. Initialization: In case of display problems or significant dysfunctions, press the 4 buttons simultaneously (START/STOP MODE, MODE, SPLIT/RESET) to reset the stop, watch (RESET) Initial settings batteries : The stopwatch uses a CR2032 type battery Replacing the battery is done by unscrewing the back cover a quarter turn, using a coin, for example. Inserting the battery is done according to the following diagram. Make sure the polarities are correctly placed. 10 Scrolling through the different modes 1 Time/Date Mode (Time) 2 Stopwatch mode 3 Setting mode for the alarm 4 Time setting mode By pressing repeatedly on the MODE button, you can access the different functioning modes as shown in the following diagram. You must make the screen corresponding to the desired function appear in order to use or set it. 1 Time/Date Mode (Time) 2 Stopwatch mode 3 Setting mode for the alarm 4 Time setting mode Modes 1 SUN MON Time/Date Mode (Time) TUE WED THU FRI SAT AM 5:1604 · · START/STOP: display of the date SPLIT/RESET : Display of the alarm MODE : go to the following mode · The indication for the day alarm will appear to right of is selected. the screen if the function The time is displayed in Anglo-Saxon mode (0-12 hours AM/PM) or in European mode (0-24 hours). Going from one to the other is done in the time setting mode. A dash indicates the day of the week at the top of the screen. Activation of the day alarm To activate or deactivate the day alarm (thus making the symbol appear or disappear), hold down SPLIT/RESET and press START/STOP at the same time. 2 AM Stopwatch mode START/STOP : start/stop the stopwatch SPLIT/RESET : record an intermediate time/reset to 0 MODE : go to the following mode 7:2244 The time measured with the stopwatch occupies the main line of the stopwatch The dashes at the top of the screen indicate the general functioning of the stopwatch. The dashes for Saturday (SA) and Sunday (SU) will flash. [. . . ] The alarm time will be adapted to the same format. If the 12h mode is selected, the AM and PM symbols will appear, depending on the case, on the left of the screen. [. . . ]