User manual GEONAUTE WATCH KRONYS 200W

[. . . ] The guarantee does not cover batteries or cracked or broken watch faces where signs of a blow are evident. Limited guarantee Congratulations on your purchase of the Trt'L 300!This device offers very good measuring precision as well as great ease of use. The Trt'l300 will accompany you for a long time during all your athletic activities. · · · · · Characteristics and functions buttons: SPLIT/RESET, RECALL, · 4 line of display, large characters START/STOP, MODE · 1 measuring from 1/100 of a second to 1 hour · precise batteries (CR2032). replaceable · case is waterproof to water spray. [. . . ] May be used for water sports or in the rain. · Fonctions 59 minutes · Stopwatch for sup to 23 hours and hour display) hour · Time (h, min, in 12year), and 24 calculation of the day of the week (from 2000 Date (day, month, automatic · 2049) to · 1 Intermediate time This stopwatch has been designed to measure intervals of time in order to optimize athletic training or for measuring performance. It is not intended for calibrating technical or safety devices (especially braking systems). It is no longer designed for arbitrating competition or to be used for any commercial purpose. Normal conditions of use Restrictions on use / guidelines governing use: · If you do not respect the following precautions, you risk losing the DECATHLON. It can therefore be · Waterproof design: The stop watch is classified asin "wateror water spray. But it is not used in humid conditions and is water-resistant rain waterproof in cases of immersion, nor is it designed to be used under water. 9 any operation or repair · Care and maintenance: To preserve the Decathlon guarantee, one is not available, no must be exclusively entrusted to a Decathlon electronics shop. If the seal for water tightness · When changing the battery, replaceinfiltrates, and check device immediately. Water may water · If condensation appears or inside the casing. check the attack the electronic elements · Avoid submitting the device to hard shocks like those received when falling onto a hard surface. It does not allow you to save information in memory. Using the stopwatch When the stopwatch has stopped, press the SPLIT/RESET button to reset to 0. The stopwatch is started/stopped by pressing the START/STOP button (Time format: minutes: seconds: 1/100 second). At the top of the screen, the dash for Friday (FR) will flash and indicate that the stopwatch is functioning. Several time measurements can be accumulated by pressing START/STOP again between each measurement. The intermediate time measurements can be displayed when the stopwatch is running by pressing repeatedly on the SPLIT/RESET button. At the top of the screen, the dash for Thursday (TH) will begin to flash, indicating that the stopwatch is in the "intermediate time" position Press SPLIT/RESET again to return to the normal stopwatch display. · · · · · 3 PM Setting mode for the alarm START/STOP: to set the parameter that is flashing SPLIT/RESET: go to the settings mode for the following parameter MODE : go to the following mode 9:59 P displayed · When entering this mode, the alarm time ismode. and the number of hours flashes to indicate that you have entered the setting Press START/STOP to set the hours Press SPLIT/RESET to make the minutes flash Press START/STOP to set the minutes ATTENTION : Depending on the time display mode (to be set in the next mode, following paragraph), you will see an "H" to the right of the time (24h display) or an "A" or a "P" (12h display). To change the alarm display, you must change the time display. [. . . ] To change the alarm display, you must change the time display. When entering the setting mode, the alarm is automatically activated. You must invalidate it by using the procedure described in the time mode. The modifications made to the alarm are automatically validated when you leave the mode by the MODE button. · · 4 AM Time setting mode START/STOP: to set the parameter that is flashing SPLIT/RESET: go to the settings mode for the following parameter MODE : go to the following mode 4:2750 12 ACC 70 Upon entering this mode, the time is displayed and the number for the seconds will flash to indicate that you have entered the setting mode. [. . . ]