User manual GEONAUTE WATCH KRONYS 300A

[. . . ] Its "data" mode can record information from five training sessions. For the distance to be calculated accurately, you will need to follow the stride length setting procedure carefully. Read the instructions carefully before use and keep them for the entire life of the product. set mode reset 2 5 1 Bottom view 18 19 EN PODOMETREDISTAT500PART1. qxd:Mise en page 1 20/03/07 15:41 Page 20 LIMITED WARRANTY GEONAUTE guarantees the initial purchaser of this device that it will be free from defects of materials or manufacture for a period of two years from the date of purchase. Please keep your receipt as proof of purchase. [. . . ] - Confirm your setting by pressing the MODE button. Set the desired value using the RESET button. - Confirm your setting by pressing the MODE button. Repeat the same procedure to set the seconds; in this operation the seconds automatically change to zero. - Confirm your setting by pressing the MODE button. Repeat the procedure to set the year, month, day and 12/24 hour mode. The day of the week is automatically displayed on the top line. - Confirm your setting by pressing the MODE button. If this is active, a moon symbol is displayed on the left of the screen and every time a button is pressed the screen lights up for 3 seconds. - Press the SET button to end the setting procedure. 22 23 EN - In TIME mode, pressing the RESET button activates or deactivates the hourly beep. When active, a bell symbol is displayed on the left of the screen and the device beeps on the hour. PODOMETREDISTAT500PART1. qxd:Mise en page 1 20/03/07 15:41 Page 24 To set the pedometer: - Press the MODE button to select STEP mode. Select cm or inches using the RESET button. - Confirm your setting by pressing the MODE button. Press the SET button to end the setting process. - After setting the alarm, activate it by pressing the RESET button. When the alarm is active, ALM on is displayed on the bottom line and a symbol appears in the bottom-left part of the screen in all modes. To stop the alarm, press one of the three buttons. 24 PODOMETREDISTAT500PART1. qxd:Mise en page 1 20/03/07 15:41 Page 26 Total number of steps and total distance covered: The device displays the cumulative number of steps and distance covered during your various sporting activities. This function allows you to keep track of the distance covered during a week, a month or a year, for example. If you do not reset this function to zero, the data will continue to be compiled. To ensure that you do not miss this information, TOTAL is displayed in the bottom-left of the screen. Automatic walking/running mode: The pedometer automatically recognises your activity mode: running or walking. It can therefore use the appropriate stride length (walking or running) to calculate the distance covered. When you alternate between walking and running during the same session, this function guarantees that the distance is correct. [. . . ] (E. g. : if you are interested in the calories in file R1, press RESET to see the calories in file R2). Resetting saved information to zero: - Select the file you want to delete by pressing the RESET button. - Hold down the RESET button for 2 seconds. "DEL" is briefly displayed on the screen, and the file is deleted. - The next archived file then takes the place of the deleted file. [. . . ]