User manual GEONAUTE WATCH KRONYS 500Y

[. . . ] For the distance calculated to be accurate, the procedures for setting stride length must be followed precisely. Read the owner's manual carefully before use and keep it for the whole lifetime of the product. This pedometer is compatible with the Géonaute R300 radio. These two products clip together to form a single unit, so you can gauge your activity level (walking or running) while listening to FM stations. R300 Mini Radio Dista T300 Pedometer 21 LIMITED WARRANTY DECATHLON guarantees the initial purchaser of this device that it is free from any faults linked to material or manufacture for a period of two years from the date of purchase. [. . . ] - Confirm the setting by pressing on the MODEbutton. Set the minutes using the RESET button. Note: while the pedometer is in setting mode, if no operation is carried out for 30 seconds, the pedometer exits setting mode automatically. Setting the time 24 - Confirm the setting by pressing on the MODEbutton. Repeat the procedure to successively set the seconds. When this procedure is performed, the seconds automatically clear to zero. - Confirm the setting by pressing on the MODEbutton. Repeat the procedure to successively set the year, the month, the day and the format (12/24 h). The day of the week is displayed automatically on the top line. - Confirm the setting by pressing on the MODE button. While the backlight is on, a moon icon is displayed on the left-hand side of the screen, and each time a button is pressed, the screen lights up for 3 seconds. - Press on the SET button to finish the setting. - In the HOUR mode, pressing once on the RESET button will turn the hourly beeper on or off. When it is on, a bell icon is displayed on the left-hand side of the screen and the device rings each time the hour changes. Set the minutes using the RESET button. It is therefore necessary to set a stride length for walking, symbolized by a walker icon on the right-hand side of the screen, and a stride length for running (runner icon). To calculate the number of calories consumed, you have to enter your weight. Setting the alarm 26 - Press on the SET button to finish the setting. - After setting the alarm, activate it by pressing on the RESET button. When the alarm has been activated, ALM on is displayed on the bottom line and a symbol appears in the lower left-hand corner of the screen in all modes. USING THE PEDOMETER Positioning the device To stop the alarm's ringer, press on any of the 3 buttons. Attach the device at waist level to your belt, clothing or equipment. Keep it in a horizontal position and fasten securely. 27 Navigation system Press on the MODE button to display the different modes: 1. STEP: Step counter, number of steps, distance covered, calories consumed and exercise stopwatch 3. TO STEP: total number of steps and total distance covered 4. ALARM: daily alarm Once it is properly fastened to your belt, the pedometer counts each step you take, from the very first step of walking or running. Display the data from the different modes: In the STEP mode, the top line displays the number of steps taken. The bottom line displays either the time passed (stopwatch), or the distance covered in km or miles, or the number of calories consumed. Press on the SET button to switch from one display to another. [. . . ] To indicate that you are in the TO STEP mode, TOTAL is displayed in the lower left-hand corner of the screen. Press on the RESET button to reset these two counters Using the TO STEP mode 29 COMPATIBLE WITH THE GEONAUTE R300 RADIO This pedometer is compatible with the Géonaute R300 radio. These two products clip together to form a single unit, so you can gauge your activity level while listening to FM stations. Fold the metal tab out of the left-hand side of the radio by pressing on the square-shaped pushbutton. 2. [. . . ]