User manual GEONAUTE WS900

[. . . ] WS900 6/07/06 17:50 Page 1 WS900 6/07/06 17:50 Page 25 EN A1. MIN/MAX: displays the current, low, and high temperatures, humidity, and UV readings A4. HISTORY: displays the pressure and UV readings from the last 24 hours ALARM: activates and sets the alarm SNOOZE / LIGHT: engages the snooze alarm 8 minutes later and the backlighting. SELECT: changes fields CHANNEL: changes the displayed measurement channel °C/°F Control: changes temperature units. [. . . ] The data for NB : The night icon is displayed during the night, arbitrarily between 6:00 PM and 6:00 AM. NB : If the temperature measured on the remote sensor for channel 1 is lower than 2°C (35. 6 °F), the icon " " changes to icon " ". LOW/HIGH RECORDINGS Press MIN/MAXseveral times to display the current low/high recordings for the selected sensor. To erase regordings, press MIN/MAX for 2 seconds. An audible signal wil sound to confirm that the memory has been erased. each sensor are displayed for 3 seconds. To terminate the automatic scanning, press CHANNEL once again, or press MIN/MAX. · · 35 36 EN This device is capable of detecting changes in local atmospheric pressure. Based on the gathered data, this device can forecast local weather for the next 12 to 24 hours. The accuracy of the weather predictions is 70 to 75%. Temperature/humidity displays WS900 6/07/06 17:51 Page 37 TEMPERATURE AND HUMIDITY TREND The trend curves are indicated beside the readings for temperature and current humidity level. Trend Increase Constant Decrease Backlighting Press SNOOZE-LIGHT to activate the backlighting for 8 seconds. EN 8 9 10 11 6 12 Re-initializating system Temperature Humidity Comfort level The comfort level indicates if the environment is pleasant, based on readings for temperature and current humidity level. Level Humid (WET) Comfortable (COM) Dry (DRY) Temperature All 20-25°C All Humidity >70% 40-70% <40% Re-initializing the functions of the device is accomplished using the RESET button. The RESET button is located on the back of the device. Press RESET when you change batteries, or any time the device does not function properly (for example, it doesn't establish a radio frequency connection with the sensor or the radio controlled clock). When you press RESET, all the settings return to their default value, and you lose all recorded information. · Barometer This device records fluctuations in atmospheric pressure in order to provide weather forecasts. The measurements of atmospheric pressure for the present and for the preceding 24 hours are recorded by the main device (indoors). 1 This information is indicated in the humidity field when the current reading is displayed. 2 3 Heat index The heat index communicates 4 warning levels at high temperatures. Category Danger Extreme Danger Danger Extreme caution Caution Temperature °C >54. 5 40. 5-54. 4 32. 2-40. 5 26. 6-32. 2 °F >130 105-130 90-105 80-90 4 5 7 To display the heat index: 1. Press SELECT to enter the temperature field. " " is displayed next to the field. Press CHANNEL to select the desired channel. If the temperature is below 26°C / 80°F, or the desired channel is not activated, the heat index displays "NA" 1. Start of countdown for UV exposure time. SPF applied to user for exposure to UV 10. User's skin type for exposure to UV 11. User number (for UV Mode) or hourly record for UV and atmospheric pressure readings 12. Altitude/atmospheric pressure/ UVI reading 37 38 WS900 6/07/06 17:51 Page 39 Barometer display field UV indication (optional) This weather station is compatible with a WS90. UV sensor (sold separately; not included in the pack). [. . . ] The order in which the steps are carried out is very important. 43 44 EN WS900 6/07/06 17:51 Page 45 Re-initializing/RESET The RESET button located on the back of the station (inside the battery compartment) is to be used in case the device does not function satisfactorily or malfunctions. All the settings return to their initial default values. You must again perform the manual settings and customize the display. CONTACT EN As we strive to continually improve the products we develop, we are interested in your feedback regarding the quality, the functionality, and the usage of our products. · In France, please call the customer service center at: 0810 08 08 08 (local call) · For any other country, please leave a message under the relevant heading on our website: www. decathlon. com We promise to answer you promptly. Maintenance Here are a few tips for maintaining the weather station: 1. [. . . ]