User manual GEORGE FOREMAN GR72

[. . . ] GR72 GEORGE FOREMAN OPEN HEARTH ELECTRIC GRILL TM IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read all instructions before using appliance. Use handles or knobs and oven mitts or pot holders. To protect against electric shock do not immerse cord, plug, or the Temperature Control Probe in water or other liquid. [. . . ] Grill Plate Sears in the juices and flavors of your favorite foods, and allows fats to drip through the grill bars for healthy, fat free cooking. Detachable splatter guard Prevents fats and juices from splashing onto work surface. Heat settings Variable heat settings provide perfect control in a multitude of cooking tasks. Temperature Control Probe The Temperature Control Probe is thermostatically controlled to ensure constant temperature, and is removable for portability and easy cleaning. Removable Drip Tray Collects fats and juices during cooking. Grill Base Supports the Grill Plate and Drip Tray. Made from durable heat resistant Nylon. 6 How To Use the George Foreman Open Hearth Grill WARNING: Charcoal or similar combustible fuels must not be used with this appliance. Before using the Grill for the first time, remove the protective film from the Grill Plate. Wash the Drip Tray and Grill Plate in warm soapy water. Place the Drip Tray into the Grill Base. Slot NOTE: Drip Tray and Grill Base MUST always be in place when Rib using the Grill. Attach the Splatter Guard to the Grill by positioning the Splatter Guard on the Grill Plate so that the slots in the Guard are resting securely over the ribs at either end of the Grill Plate, as shown in Figure 1. The Splatter Figure 1 Guard simply lifts off for easy cleaning and storage. Turn the Temperature Control Probe to "OFF", insert it fully into the receptacle on the Grill Plate. Plug the cord into a 120V AC electrical outlet. To preheat: Turn the Temperature Control Probe dial to the desired heat setting, or the heat setting recommended in the recipe/Grilling Chart. Note: The Thermostat Light on the Temperature Control Probe indicates the Grill is heating. The light will remain ON until the set temperature has been reached and then will cycle ON and OFF as needed to maintain the set temperature. Allow the Grill to preheat except where noted on the Grilling Chart. The preheat time will depend on the heat setting selected. If a high heat setting is selected, a longer preheat time is required. Carefully place the items to be cooked on the Grill Plate and allow the food to cook until done. [. . . ] Important: Always make sure the Probe Receptacle is completely dry before reinserting the Temperature Control Probe. Stubborn build-up: If necessary, use a non-metallic scrubbing pad to clean the Grill Plate and a stiff, non-metallic brush to clean between the grill bars. Do not use steel wool, scouring pads, or abrasive cleaners on any part of the Grill. Cleaning Temperature Control Probe: If necessary, wipe with a damp cloth and dry thoroughly. [. . . ]