User manual GIANT BICYCLES GLORY DROPOUT SWAP GUIDE

[. . . ] DROPOUT SWAP GUIDE Congratulations on your purchase of a Giant GLORY. [. . . ] This is only an overview of the assembly and care tasks. How to swap the dropout from type 1 to type 2 or type 3 Tools 5 mm and 6 mm Allen key 19 mm wrench Bolt ! Step 1: Use a 5mm Allen key, remove the rear derailleur from the dropout. Step 2: Use a 6mm Allen key and 19mm wrench, remove the thru axle. Step 3: Use a 5 mm Allen key, remove the upper dropout mounting bolt. Step 4: Install the Type 2 or Type 3 dropout and tighten to the proper torque of 8-10 Nm. Type 1 Type 2 Type 3 Assembly instructions Each GLORY comes with three types of dropouts. The stock Glory comes stock with the Type 1 standard for a regular derailleur and traditional axle. You can swap this unit out for a Type 2 system which will allow you use a SHIMANO SAINT derailleur or Type 3 system which will allow you to use a ROCKSHOX MAXLE thru axle. The assembly order of the parts are listed in the following table DROPOUT TYPE 1 : Bolt Step 5: To install the derailleur and thru axle, please refer to the manufacturer's technical information. [. . . ] with 12mm thru-axle DROPOUT TYPE 3: GIANT Dropout RE8DB Compatible with Rockshox rear maxle thru axle Standard type rear derailleur (For example SRAM X. 0 or SHIMANO XTR) ROCKSHOX Maxle type axle O. L. D 150mm. [. . . ]