User manual GIANT EXPRESSWAY

[. . . ] FOLDING INSTRUCTIONS (continued) STEP 3 Open the FRAME FOLDING QUICK RELEASE lever (FIG. 9 and 10) and fold the front half to the non-drive side (left side) of the bicycle. FIG. 11 Some Expressway bicycles feature a hinged kickstand that will angle and lock inward (FIG. [. . . ] sEE yOur auThOriZEd giaNT dEalEr immEdiaTEly fOr sErvicE. WARNING WARRANTY For complete details of the warranty, please refer to the Giant Owner's Manual or visit our website: www. giant-bicycles. com © Giant Bicycle, January 2010 GIANT EXPRESSWAY FOLDING GUIDE Thanks for purchasing the Giant Expressway folding bicycle. This guide will help you properly fold and unfold your Expressway. Please read it thoroughly along with the Giant Owner's Manual. NOTE: bEfOrE ridiNg yOur ExprEssway fOldiNg bicyclE fOr ThE firsT TimE, makE surE TO familiariZE yOursElf wiTh ThE lOcaTiON aNd OpEraTiON Of all ThE quick rElEasE lEvErs. HANDLEBAR ROTATION QUICK RELEASE STEM HEIGHT QUICK RELEASE SEAT POST QUICK RELEASE STEM FOLDING QUICK RELEASE 1. before each ride, check to make sure all quick release levers are closed and properly secured. do not over-tighten the quick release levers. always hand-tighten until clamping is snug. Never use a tool or wrench to tighten the quick release levers. Never ride the bicycle if the frame is damaged or the quick release levers are loose or damaged. Never ride the bicycle with the seat post or stem extended beyond the "minimum insertion" or "maximum Extension" mark. Never ride the bicycle if the handlebar continues to rotate after the haNdlEbar rOTaTiON quick rElEasE has been closed. caution FRAME FOLDING QUICK RELEASE FOLDING INSTRUCTIONS STEP 1 Rotate the crank set so that the pedal on the drive side (right side) of the bicycle is even with the chain stay (FIG. 4). Then, fold both pedals by first pulling in on the spring-loaded release inside the pedal and then folding down (FIG 5). SEAT POST QUICK RELEASE Open the sEaT pOsT quick rElEasE lever (FIG. 1) and raise or lower the seat post to the correct height. The seat post has an etched or stamped mark on its shaft which designates the post's "Minimum Insertion" or "Maximum Extension. " This mark must not be visible above the quick release. [. . . ] 7 and 8). HANDLEBAR ROTATION QUICK RELEASE Open the haNdlEbar rOTaTiON quick rElEasE lever (FIG. 3) and rotate the handlebar to a comfortable position, making sure the brake levers are within easy reach. Close the haNdlEbar rOTaTiON quick rElEasE lever securely, making sure it does not slip. FIG. [. . . ]