User manual GIANT FAITH DROPOUT SWAP GUIDE

[. . . ] DROPOUT SWAP GUIDE Congratulations on your purchase of a Giant FAITH. [. . . ] Damage to the dropout may cause loss of structural integrity and possibly result in serious personal injury or death. Proper assembly of the dropout will ensure the best performance and comfort from your bicycle. This is only an overview of the assembly and care tasks. Step 1: Use a 5mm Allen key, remove the rear derailleur from the dropout. Step 2: Use a 6mm Allen key and 19mm wrench, remove the thru axle. Step 3: Use a 5 mm Allen key, remove the upper dropout mounting bolt (2 pieces). Step 4: Install the Type 2 dropout and tighten to the proper torque of 80-100 kgf/cm (69-86 in. -lbs). Step 5: To install the derailleur and thru axle, please refer to the manufacturer's technical information. How to swap the dropout from Type 1 to Type 2 Tools 5 mm and 6 mm Allen key 19 mm wrench Assembly instructions Each FAITH comes with two types of dropouts. [. . . ] All spare parts for GIANT dropout are available separately through GIANT dealers. Warranty Please refer to the Giant Owner's Manual or visit our website Type 2: RC 445 mm at www. giant-bicycles. com for complete warranty provisions. [. . . ]