User manual GIGABYTE 7VT600-RZ

[. . . ] 7VT600-RZ / 7VT600-RZ-C User's Manual Rev. 1003 12ME-7VT600RZ-1003 AMD AthlonTM / AthlonTM XP / DuronTM Socket A Processor Motherboard Copyright © 2004GIGABYTE TECHNOLOGYCO. , LTD Copyright by GIGA-BYTETECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the propertyof their respective owners. Notice Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] 3. 5 inch double-sided drive; 2. 88M byte capacity. FFloppy 3 Mode Support (for Japan Area) 8Disabled 8Drive A 8Drive B 8Both Normal Floppy Drive. (Default value) Enabled 3 mode function of Drive A. Drive A & B are 3 mode Floppy Drives. FHalt on The category determines whether the computer will stop if an error is detected during power up. 8NO Errors The system boot will not stop for any error that may be detected and you will be prompted. 8All Errors Whenever the BIOS detects a non-fatal error the system will be stopped. 8All, But Keyboar The system boot will not stop for a keyboard error; it will stop for all other errors. (Default value) 8All, But Diskette The system boot will not stop for a disk error; it will stop for all other errors. 8All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all other errors. Memory The category is display-only which is determined by POST (Power On Self Test) of the BIOS. Base Memory The POST of the BIOS will determ ine the amount of base (or conventional) memory installed in the system. The value of the base mem ory is typically 512 K for systems with 512 K memory installed on the m otherboard, or 640 K for systems with 640 K or more memory installed on the motherboard. ExtendedMemory The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 M B in the CPU memory address map. 7VT600-RZ Series Motherboard - 24 - Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Advanced BIOS Features First Boot Device Second Boot Device Third Boot Device Password Check [Floppy] [HDD-0] [CDROM] [Setup] Item Help Menu Level} Select Boot Device priority [Floppy] Boot from floppy [LS120] Boot from LS120 [HDD-0] Boot from First HDD [HDD-1] Boot from Second HDD English higf : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Save Default ESC: Exit F1: General Help F7: Optimized Defaults FFirst / Second / Third Boot device M This feature allows you to select the boot device priority. 8Floppy 8LS120 8HDD-0~3 8SCSI 8CDROM 8LAN 8USB-CDROM 8USB-ZIP 8USB-FDD 8USB-HDD 8ZIP 8Disabled Select your boot device priority by Floppy. Select your boot device priority by LS120. Select your boot device priority by HDD-0~3. Select your boot device priority by SCSI. Select your boot device priority by CDROM. Select your boot device priority by LAN. Select your boot device priority by USB-CDROM. Select your boot device priority by USB-ZIP. Select your boot device priority by USB-FDD. Select your boot device priority by USB-HDD. Select your boot device priority by ZIP. The system can not boot and can not access to Setup page will be denied if the correct password is not entered at the prompt. [. . . ] The BIOS Setup program allows you to specify two separate passwords: SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS Setup program function. When enabled, the Supervisor password is required for entering the BIOS Setup program and having full configuration fields, the User password is required to access only basic items. If you select "System " at "Password Check" in Advance BIOS Features Menu, you will be prom pted for the password every time the system is rebooted or any tim e you try to enter Setup M enu. [. . . ]