User manual GIGABYTE 8I845GE-RZC

[. . . ] 8I845GE-RZ / 8I845GE-RZ-C Intel® Pentium® 4 Processor Motherboard User's Manual Rev. 1001 12ME-I845GERZ-1001 Copyright © 2004 GIGABYTE TECHNOLOGY CO. , LTD Copyright by GIGA-BYTE TECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the property of their respective owners. Notice Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] (Default value) All, But Diskette The system boot will not stop for a disk error; it will stop for all other errors. All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all other errors. Memory The category is display-only which is determ ined by POST (Power On Self Test) of the BIOS. Base Memory The POST of the BIOS will determine the amount of base (or conventional) m emory installed in the system. The value of the base m em ory is typically 512K for systems with 512K m em ory installed on the motherboard, or 640K for systems with 640K or m ore memory installed on the motherboard. Extended Memory The BIOS determines how much extended memory is present during the POST. This is the am ount of mem ory located above 1 M B in the CPU's memory address map. Total Memory This item displays the memory size that used. 8I845GE-RZ Series Motherboard - 24 - Advanced BIOS Features CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Advanced BIOS Features First Boot Device Second Boot Device Third Boot Device Boot Up Floppy Seek Password Check CPU Hyper-Threadingno te Init Display First Graphics Aperture Sizeno te Graphics Share Memoryno te 4 3 1 2 English [Floppy] [HDD-0] [CDROM] [Disabled] [Setup] [Enabled] [Enabled] [Onboard/AGP] [128MB] [8M] Item Help Menu Level } Select Boot Device Priority [Floppy] Boot from floppy Limit CPUID Max. to 3not e [LS120] Boot from LS120 [HDD-0] Boot from First HDD [HDD-1] Boot from second HDD higf : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults Note 1: This option appears only when the Intel Pentium ® 4 processor you install on the system supports the Hyper-Threading Technology. Note 2: This option is available only when you install an Intel® Prescott processor Note 3/4: This option is available only when you use the onboard VGA function. First / Second / Third Boot Device Floppy LS120 HDD-0~3 SCSI CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled Select your Select your Select your Select your Select your Select your Select your Select your Select your Select your Select your Select your boot device priority by Floppy. boot device priority by Disabled. Boot Up Floppy Seek During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is 40 tracks 720K, 1. 2M and 1. 44M are all 80 tracks. Disabled BIOS will not search for the type of floppy disk drive by track number. Note that there will not be any warning message if the drive installed is 360K. (Default value) Enabled BIOS searches for floppy disk drive to determ ine if it is 40 or 80 tracks. Note that BIOS can not tell from 720K, 1. 2M or 1. 44M drive type as they are all 80 tracks. - 25 - BIOS Setup English Password Check Setup System The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) The system will not boot and will not access to Setup page if the correct password is not entered at the prompt. CPU Hyper-Threading This option is available only when you install an Intel® Hyper-Threading processor. Enabled Enable CPU Hyper Threading Feature. Please note that this feature is only working for operating system with multi processors mode supported. to 3 This option is available only when you install an Intel® Prescott processor. Enabled Limit CPUID Maximum value to 3 when using older OS like NT4. (Defaults value) Disabled Disable CPUID Limit for Windows XP. Init Display First Select the first initation of the m onitor display from onboard/AGP or PCI VGA card. Onboard/AGP Set Init Display First to onboard/AGP. (Default value) Graphics Aperture Size This option is available only when you use the onboard VGA function. 128MB Set Graphics Aperture Size to 128MB. (Default value) Disabled Disable this function. Graphics Share Memory This option is available only when you use the onboard VGA function. [. . . ] Support : http://www. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support (Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address : http://www. giga-byte. com -- Germany G. B. T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm 112 22047 Hamburg TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech. ) FAX: +49-40-25492343 (Sales) +49-1803-428329 (Tech. ) Tech. Support : http://de. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. [. . . ]