User manual GIGABYTE 8S651MP-RZC

[. . . ] Intel Pentium® 4 Processor Motherboard 8S651MP-RZ / 8S651MP-RZ-C User's Manual Rev. 1001 12ME-8S651MPRZ-1001 Copyright © 2003GIGABYTE TECHNOLOGYCO. , LTD Copyright by GIGA-BYTETECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any from without the expressed, written permission of GBT. Trademarks Third-party brands and names are the propertyof their respective owners. Notice Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. [. . . ] All, But Key board The s y stem boot w ill not stop for a key board error; it w ill stop for all other errors . (Default v alue) All, But Disk ette The sy stem boot w ill not stop for a disk error; it w ill stop for all other errors. All, But Disk /Key The sy stem boot w ill not stop for a key board or disk error; it w ill stop for all other errors. Memory The c ategory is display -only w hich is determined by POST (Pow er On Self Test) of the BIOS. Base Memory The POST of the BIOS w ill determine the amount of base (or conv entional) memory ins talled in the sy stem. The v alue of the base memory is ty pic ally 512K for sy stems w ith 512K memory installed on the motherboard, or 640K for sy stems w ith 640K or more memory installed on the motherboard. Extended Memory The BIOS determines how much ex tended memory is present during the POST. This is the am ount of memory located abov e 1 MB in the CPU 's memory address map. 8S651MP-RZ Series Motherboard - 24 - Advanced BIOS Features CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware Adva nced BI OS Feat ures First Boot Device Second Boot Device Third Boot Device Boot Up Floppy Seek Password Check [Floppy] [HDD-0] [CDROM] [Disabled] [Setup] Item Help Menu L evel} Selec t Boot D evice prio rity [Flo ppy] Boot from fl oppy [LS1 20] Boot from L S120 [HDD -0] Boot from Firs t HDD [HDD -1] Boot from Secon d HDD higf: M ove Enter: Select F5: P revious V alues +/-/ PU/PD: V alue F10: Save F6: Fa il-Save De fault ESC: Exit F1: General Help F7: Optimiz ed Defa ults English First / Second / Third Boot Device Floppy LS120 HDD-0~3 SCSI CDROM ZIP USB-FDD USB-ZIP USB-CDROM USB-HDD LAN Disabled Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority Select y our boot dev ice priority by by by by by by by by by by by by Floppy . Disabled. Boot Up Floppy Seek During POST, BIOS w ill determine the floppy disk driv e installed is 40 or 80 tracks. 360K ty pe is 40 tracks 720K, 1. 2M and 1. 44M are all 80 tracks. Enabled BIOS searches for floppy disk driv e to determine it is 40 or 80 tracks. Note that BIOS can not tell from 720K, 1. 2M or 1. 44M driv e ty pe as they are all 80tracks. Disabled BIOS w ill not search for the ty pe of floppy disk driv e by track number. Note that there w ill not be any w arning message if the driv e installed is 360K. (Default v alue) Password Check Sy stem Setup The sy stem w ill not boot and w ill not access to Setup page if the correct passw ord is not entered at the prompt. The sy stem w ill boot but w ill not access to Setup page if the correct passw ord is not entered at the prompt. (Default v alue) - 25 - BIOS Setup English Integrated Peripherals CMOS Setup Ut ility-Co pyright (C) 1984 -2004 Aw ard Soft ware Inte grated Periphe rals IDE1 Conductor Cable IDE2 Conductor Cable On-Chip Primary PCI IDE On-Chip Secondary PCI IDE AC97 Audio Onboard LAN Device (*) System Share Memory Size USB Controller USB Legacy Support Init Display First Onboard Serial Port A Onboard Serial Port B Serial Port B Mode Onboard Parallel Port Parallel Port Mode x EPP Mode Select ECP Mode Use DMA Game Port Address Midi Port Address Midi Port IRQ higf: M ove Enter: Select F5: P revious V alues [Auto] [Auto] [Enabled] [Enabled] [Enabled] [Enabled] [32MB] [Enabled] [Disabled] [AGP] [3F8/IRQ4] [2F8/IRQ3] [Normal] [378/IRQ7] [ECP] EPP1. 7 [3] [201] [330] [10] +/-/ PU/PD: V alue F10: Save F6: Fa il-Save De fault Item Help Menu Level u [Auto] Auto-detect IDE cable type [ATA66/100/133] Set Conductor cable to ATA66/100/133 (80-pins) [ATA33] Set Conductor cable to ATA33(40-pins) ESC: Exit F1: General Help F7: Optimiz ed Defa ults IDE1 Conductor Cable Auto ATA66/100/133 ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure y our IDE dev ice and cable is compatible w ith ATA66/100/133). Set IDE1 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable is compatible w ith ATA33). (Default Value) Set IDE2 Conductor Cable to ATA66/100/133 (Please make sure y our IDE dev ice and cable is compatible w ith ATA66/100/133). Set IDE2 Conductor Cable to ATA33 (Please make sure y our IDE dev ice and cable is compatible w ith ATA33). (Default v alue) Disable onboard 1st channel IDE port. (Default v alue) Disable onboard 2nd channel IDE port. IDE2 Conductor Cable Auto ATA66/100/133 ATA33 On-Chi p Primary P CI IDE Enabled Disabled Enabled Disabled On-Chip Secondary P CI IDE AC97 Audio Enabled Disabled "*" F or 8S651MP-RZ only. Enable onboard AC'97 audio function. (Default v alue) Disable this function. 8S651MP-RZ Series Motherboard - 26 - Onboard LAN Devi ce Enabled Disabled (*) English Enable onboard LAN dev ice. (Default v alue) Disable onboard LAN dev ice. System Share Memory Size 4MB/8MB/16MB/32MB/64MB Set onchip VGA shared memory size. (Default Value:32MB) USB Controller Enabled Disabled Enable USB Controller. (Default v alue) Disable USB Controller. USB Legacy Support Enabled Disabled Enable USB Legacy Support. [. . . ] Once we get the latest SiS® USB2. 0 driver for Windows 98 and Windows ME, we will put the driver on GIGABYTE website asap. (http://www. gigabyte. com. tw). For USB2. 0 driver support under Windows XP operating system, please use Windows Service Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus controller" under "Device Manager". Please remove the question mark and restart the system (System will auto-detect the right USB2. 0 driver). [. . . ]