User manual GIGABYTE GA-6VTXE-A

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GIGABYTE GA-6VTXE-A. We hope that this GIGABYTE GA-6VTXE-A user guide will be useful to you.

Lastmanuals help download the user guide GIGABYTE GA-6VTXE-A.

Download

You may also download the following manuals related to this product:

GIGABYTE GA-6VTXE-A annexe 1 (1144 ko)

Manual abstract: user guide GIGABYTE GA-6VTXE-A

Detailed instructions for use are in the User's Guide.

 [. . . ] FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B digital device ,  pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates,  uses,  and can radiate radio frequency energy,  and if not installed and used in accordance with the instructions,  may cause harmful interference to radio communications. However,  there is no guarantee that interference will not occur in a particular installation.  [. . . ] (Default Value) Set Password Check to Always. 

· Processor Serial Number
Disabled Enabled Disabled CPU Serial Number. (Default Value) Enabled CPU Serial Number. 

35

BIOS Setup

Chipset Features Setup
AMIBIOS SETUP ­CHIPSET FEATURE CMOS SETUP ( C ) 1999 American Megatrends,  Inc. All Rights Reserved *** DRAM Timing *** Top Performance SDRAM Timing by SPD SDRAM CAS# Latency DRAM Frequency RAS# Drive :Disabled :Disabled :3 :Auto :24mA

C2P Concurrency & Master DRAM Integrity Mode AGP Mode AGP Comp. Driving AGP Aperture Size USB Controller USB Legacy Support DRAM Drive Strength Delay DRAM Read Latch Memory Data Drive SDRAM Command Drive Memory Address Drive CAS# Drive

:Enabled :Disabled :4X :Auto :64MB :Enabled :Disabled :Auto :1. 5ns :6Ma :24MA :24MA :12Ma

ESC : Quit : Select Item F1: Help PU/PD/+/- : Modify F5: Old Values (Shift)F2 :Color F6: Load Fail-Safe Defaults F8:Flash Utility F7: Load Optimized Defaults

Figure 4: Chipset Features Setup

· Top Performance
Disabled Enabled Set Top Performance is disabled. (Default Value) Set Top Performance is enabled. 

· SDRAM Timing by SPD
Disabled Enabled SDRAM Timing by SPD Function Disabled. (Default Value) SDRAM Timing by SPD Function Enabled. 

· SDRAM CAS# Latency
3 2 For Slower SDRAM DIMM module. (Default Value) For Fastest SDRAM DIMM module. 

· DRAM Frequency
Auto 100MHz 66MHz 133MHz Set DRAM Frequency automation. (Default Value) Set DRAM Frequency is 100MHz. Set DRAM Frequency is 133MHz. 
36

6VTXE(-A) Motherboard

· C2P Concurrency & Master
Enabled Disabled Enabled C2P Concurrency & Master. (Default Value) Disabled C2P Concurrency & Master. 

· DRAM Integrity Mode
ECC Disabled For 72 bit ECC type DIMM Model. (Default Value)

· AGP Mode
4X 1X 2X Set AGP Mode is 4X. Set AGP Mode is 2X. 

· AGP Comp. Driving is Manual. 

· AGP Aperture Size
4MB 8MB 16MB 32MB 64MB 128MB 256MB Set AGP Aperture Size to 4MB. (Default Value) Set AGP Aperture Size to 128 MB. Set AGP Aperture Size to 256 MB. 

· USB Controller
Enabled Disabled USB Controller Function Enabled. (Default Value) USB Controller Function Disabled. 

· USB Legacy Support
Keyboard Keyb+Mouse Disabled Set USB Legacy Support Keyboard. (Default Value)

37

BIOS Setup

· DRAM Drive Strength
Auto Manual Set DRAM Drive Strength by auto. (Default Value) Set DRAM Drive Strength by manual. 

· Memory Data Drive
6 mA 8 Ma Set Memory Data Drive to 6Ma. (Default Value)

· SDRAM Command Drive
24 mA 16 Ma Set SDRAM Command Drive to 24Ma. (Default Value)

· Memory Address Drive
24 mA 16 Ma Set Memory Address Drive to 24Ma. (Default Value)

· CAS# Drive
12 mA 8 Ma Set CAS# Drive to 12Ma. (Default Value)

· RAS# Drive
24 mA 16 Ma Set RAS# Drive to 24Ma.  [. . . ] (°C / °F)
Detect System Temperature automatically. 
50

6VTXE(-A) Motherboard

· ·

Current CPU FAN Speed
Detect CPU Fan speed status automatically . 

Current System FAN Speed
Detect System Fan speed status automatically . 

· Current Voltage (V) VCORE / +3. 3V / +12V / +5V
Detect system's voltage status automatically. 

51

BIOS Setup

Set Supervisor / User Password
When you select this function,  the following message will appear at the center of the screen to assist you in creating a password. 
AMIBIOS SIMPLE SETUP UTILITY-VERSION 1. 24h ( C ) 1999 American Megatrends,  Inc. All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD

PNP/PCI CONFIGURATION IDE HDD AUTO DETECTION Enter new supervisor password: LOAD Fail-Safe DEFAULTS LOAD Optimized DEFAULTS SAVE & EXIT SETUP EXIT WITHOUT SAVING
F5 : Old Values F10: Save & Exit

ESC : Quit  : Select Item (Shift) F2 : Change Color F6 : Load Fail-Safe Defaults F7: Load Optimized Defaults F8:Flash Utility

Chang /Set /Disabled Password

Figure 11: Password Setting Type the password,  up to six characters,  and press <Enter>. The password typed now will clear the previously entered password from CMOS memory. You will be asked to confirm the password.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GA-6VTXE-A

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GA-6VTXE-A will begin.