User manual GIGABYTE GA-7TESM

[. . . ] GA-7TESM Dual Xeon Processor Motherboard USER'S Manual Xeon® Processor Motherboard Rev. 1001 * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!The WEEE marking applies only in European Union's member states. * English Table of Content Table of Contents Item Checklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] (Default setting) Disables this function. (Default setting) Disable CPU Thermal Trip. (Default setting) CPU Thermal Trip Enabled Disabled Options BMC Action for CPU Thermal Trip Processor Retest Enabled Disabled MPS Ordering The legacy ordering should be used for Windows 2000 or eariler operaying systems. The modern ordering should be used for Windows XP or a later operating systems. Options Legacy Ordering, and Modern Ordering. (Default setting) NUMAAware Enabled 37 BIOS Setup Disabled Disable NUMA Aware. (Default setting) Disable ACPI SRAT Report. Enable Intel Hyper Threading Technology. (Default setting) Disable Intel Hyper Threading Technology. (Default setting) Disable Machine Checking. (Default setting) Enable Thermal Management. (Default setting) Disable Thermal Management. ACPI SRAT Report Enabled Disabled Options Enabled Disabled Active Processor Cores Hyper-Threading Technology A20M Support Enabled Disabled Machine Checking Enabled Disabled Enabled Disabled Enabled Disabled Discrete MTRR Allocation Thermal Management 38 GA-7TESM Motherboard Power Management Figure 2-1-1: Power Management EIST (GV3) & C State Enabled Disabled Enable EIST (GV3) and C State items. (Default setting) Disable EIST (GV3) and C State items. In HW_ALL mode, the rpocessor hardware is responsible for coordinating the P-state among logical processors dependencies. The OS is responsible for keeping the P-state request up to date on all logical processors. (Default setting) EIST (GV3) Enabled Disabled HW_ALL EIST PSD Function 39 BIOS Setup SW_ALL In SW_ALL mode, the OS Power Manager is responsible for coordinating the P-state among loical processors with dependencies and must initiate the transition on all of those Logical Processors. SW_ANY In SW_ANY mode, the OS Power Manager is responsible for corrdinating the P-state among logical processors with dependencies and may initiate the transition on any of those Logical Processors . Turbo Mode Turbo Mode automatically allows processor cores to run faster than marked frequency if the physical processor is operating below power, temperature and current specification limits. Turbo Mode can be engaged with SMT (Simultanceous Multi Threading) enabled and 1 to 4 cores active and is not limited to only a single core or logical processor. Enable ACPI C-State (C0, C1/C1E, C3, C6 and C7). Desire state for the Nehalem core C3 state include in the CST as ACPI C3 state. C2 Disabled Desire state for the Nehalem core C2 state include in the CST as ACPI C2 state. (Default setting) Disable OS ACPI C3 Report. [. . . ] Options 9600, 19. 2k, 38. 4k. Terminal Type This option allows user to select the specified terminal type. Options VT100, VT100 8bit, PC-ANSI 7bit, VT100+, VT-UTF8, ASCII. Continue C. R. after POST This option allows user to enable console redirection after O. S has loaded. On Off Enable console redirection after O. S has loaded. [. . . ]