User manual GIGABYTE GA-7VEML

[. . . ] The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commit ment to up date the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: G. B. T. [. . . ] (Default Value) Only Primary IDE channel is enabled. Only Secondary IDE channel is enabled. 40 BIOS Setup IDE1 Conductor Cable Auto ATA66/100 ATA33 Will be automatically detected by BIOS (Default Value) Set IDE1 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100) Set IDE1 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33) IDE2 Conductor Cable Auto ATA66/100 ATA33 Will be automatically detected by BIOS (Default Value) Set IDE2 Conductor Cable to ATA66/100 (Please make sure your IDE device and cable is compatible with ATA66/100) Set IDE2 Conductor Cable to ATA33 (Please make sure your IDE device and cable is compatible with ATA33). IDE Boot Delay (Sec. ) Disabled 1~10 Disable this function. (Default Value: 7) On Board FDC Auto Disabled Enabled Set On Board FDC to Auto. Enable On Board FDC. Onboard Serial Port 1 Auto 3F8/COM1 2F8/COM2 3E8/COM3 2E8/COM4 Disabled BIOS will automatically setup the port 1 address. (Default Value) Enable onboard Serial port 1 and address is 3F8. Enable onboard Serial port 1 and address is 2F8. Enable onboard Serial port 1 and address is 3E8. Enable onboard Serial port 1 and address is 2E8. Disable onboard Serial port 1. 41 GA-7VEML Motherboard Onboard Serial Port 2 Auto 3F8/COM1 2F8/COM2 3E8/COM3 2E8/COM4 Disabled BIOS will automatically setup the port 2 address. (Default Value) Enable onboard Serial port 2 and address is 3F8. Enable onboard Serial port 2 and address is 2F8. Enable onboard Serial port 2 and address is 3E8. Enable onboard Serial port 2 and address is 2E8. Disable onboard Serial port 2. Serial Port 2 Mode Normal IrDA ASK IR Normal operation. (Default Value) Onboard I/O chip supports IrDA. Onboard I/O chip supports ASK IR. Duplex Mode Half Duplex N/A Full Duplex IR Function Duplex Half. (Default Value) IR Function Duplex Full. OnBoard Parallel port 378 278 3BC Auto Disabled Enable On Board LPT port and address is 378. Enable On Board LPT port and address is 278. Enable On Board LPT port and address is 3BC. (Default Value) Disable On Board LPT port. Parallel Port Mode EPP ECP Normal EPP+ECP Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. Using Parallel port as Enhanced Parallel Port & Extended Capabilities Port. 42 BIOS Setup Parallel Port DMA Auto 3 1 0 Set Auto to parallel port mode DMA Channel. [. . . ] Microsoft(R) Windows98 © Copyright Microsoft Corp 1981-1999 A:\> dir/w Volume in drive A has no label Volume Serial Number is 16EB-353D Directory of A:\ COMMAND. COM 7VTX. F4 FLASH841. EXE 3 file(s) 838, 954 bytes 0 dir(s) 324, 608 bytes free A:\> Flash841 7VTX. F4 (2) Now screen appears the following Flash Utility main menu. Press "Enter", the highlighted item will locate on the model name of the right-upper screen. Right after that, press "Enter" to start BIOS Flash Utility. 71 GA-7VEML Motherboard (3) It will pop up a screen and asks "Are you sure to flash the BIOS?" Press [Enter] to continue the procedure, or press [ESC] to quit. Beware: Please do not turn off the system while you are upgrading BIOS. [. . . ]