User manual GIGABYTE GA-7VKMLE

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date before publicution of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] All Rights Reserv ed STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Load Fail-Safe Defaults?HDD AUTO DETECTION PNP / PCI CONFIGURATION IDE (Y/N)?N LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit hifg: Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Sav e & Ex it F7: Optimized Values F8: Q-Flash Utility Load Fail-Safe Defaults Figure 7: Load Fail-Safe Defaults FLoad Fail-Safe Defaults Fail-Safe defaults contain the most appropriate system parameter values of to configure the system to achieve maximum stability. - 41 - BIOS Setup English Load Optimized Defaults AMIBIOS SIMPLE SETUP UTILITY - VERSION 2. 00 (C) 2001 American Megatrends, Inc. All Rights Reserv ed STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Load Optimized Defaults?(Y/N)?N DETECTION PNP / PCI CONFIGURATION IDE HDD AUTO LOAD FAIL-SAFE DEFAULTS LOAD OPTIMIZED DEFAULTS ESC: Quit hifg: Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING F5: Old Values F6: Fail-Safe Values F10:Sav e & Ex it F7: Optimized Values F8: Q-Flash Utility Load Optimized Defaults Figure 8: Load Optimized Defaults FLoad Optimized Defaults Optimized defaults contain the most appropriate system parameter values to configure the sy stem to achiev e max imum performance. GA-7VKMLE Motherboard - 42 - English Integrated Peripherals AMIBIOS SETUP - INTEGRATED PERIPHERALS ( C ) 2001 American Megatrends, Inc. All Rights Reserv ed OnBoard IDE IDE1 Conductor Cable IDE2 Conductor Cable OnBoard FDC OnBoard Serial Port 1 OnBoard Serial Port 2 OnBoard Parallel Port Parallel Port Mode Parallel Port IRQ Parallel Port DMA OnBoard MIDI Port MIDI Port IRQ OnBoard Game Port OnBoard AC' Audio 97 OnBoard Lan Chip :Both :Auto :Auto :Auto :Auto :Auto :Auto :ECP :Auto :Auto :300 :5 :201 :Auto :Enabled ESC : Quit F1 : Help F5 : Old Values F6 : Fail-Safe F8 : Q-Flash Utility Figure 9: Integrated Peripherals higf: Select Item PU/PD+/-/ : Modify (Shift)F2: Color F7:Optimized F OnBoard IDE 8Disabled 8Both 8Primary 8Secondary Disabled OnBoard IDE. Set OnBoard IDE is Both (Default Value). Set OnBoard IDE is Secondary . F IDE1 Conductor Cable 8Auto 8ATA66/100 8ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE1 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ic e and cable is compatible w ith ATA66/ 100). Set IDE1 Conduc tor Cable to ATA33 (Please m ake sure y our IDE dev ice and c able is c ompatible w ith ATA33). - 43 BIOS Setup English F IDE2 Conductor Cable 8Auto 8ATA66/100 8ATA33 Will be automatically detected by BIOS. (Default Value) Set IDE2 Conductor Cable to ATA66/100 (Please make sure y our IDE dev ic e and cable is compatible w ith ATA66/ 100). Set IDE2 Conduc tor Cable to ATA33 (Please m ake sure y our IDE dev ice and c able is c ompatible w ith ATA33). FOn Board F DC 8Auto 8Disabled 8Enabled Set On Board FDC is Auto (Default Value). Enabled On Board FDC. FOnboard Serial Port 1 8Auto 83F8/COM1 82F8/COM2 83E8/COM3 82E8/COM4 8Disabled BIOS w ill automatically setup the port 1 address (Default Value). Enable onboard Serial port 1 and address is 3F8. Enable onboard Serial port 1 and address is 2F8. Enable onboard Serial port 1 and address is 3E8. Enable onboard Serial port 1 and address is 2E8. Disable onboard Serial port 1. FOnboard Serial Port 2 8Auto 83F8/COM1 82F8/COM2 83E8/COM3 82E8/COM4 8Disabled BIOS w ill automatically setup the port 2 address. (Default Value) Enable onboard Serial port 2 and address is 3F8. Enable onboard Serial port 2 and address is 2F8. Enable onboard Serial port 2 and address is 3E8. Enable onboard Serial port 2 and address is 2E8. Disable onboard Serial port 2. FOnBoard Parallel port 8378 8278 83BC 8Auto 8Disabled Enable On Board LPT port and address is 378. [. . . ] 1 beep Refresh failure 2 beeps Parity error 3 beeps Base 64K memory failure 4 beeps Timer not operational 5 beeps Processor error 6 beeps 8042 - gate A20 failure 7 beeps Processor exception interrupt error 8 beeps Display memory read/write failure 9 beeps ROM checksum error 10 beeps CMOS shutdown register read/write error 11 beeps Cache memory bad g AWARD BIOS Beep Codes 1 short: System boots successfully 2 short: CMOS setting error 1 long 1 short: DRAM or M/B error 1 long 2 short: Monitor or display card error 1 long 3 short: Keyboard error 1 long 9 short: BIOS ROM error Continuous long beeps: DRAM error Continuous short beeps: Power error GA-7VKMLE Motherboard - 68 - Troubleshooting If you encounter any trouble during boot up, please follow the troubleshooting procedures . START English Turn off the power and unplug the AC power cable, then remove all of the add-on cards and cables from motherboard. Please make sure motherboard & chassis are not short ? Yes Please isolate the short pin. No Failure has been excluded. Please make sure all jumper settings (such as CPU system bus speed, frequency ratio, voltage and etc. ) are set properly. No Make sure the jumper setting are correct. Yes Failure has been excluded. No Plug the CPU cooling fan power in the CPU fan connector. Plug in the AC power connector. Check if the CPU cooling fan attached to CPU properly. ls CPU cooling fan power connected to CPU_FAN properly? [. . . ]