User manual GIGABYTE GA-7VM400AFA

[. . . ] GA-7VM400A-FA AMD Socket A Processor Motherboard USER'S MANUAL AMD AthlonTM/ AthlonTM XP / DuronTM Socket A Processor Motherboard Rev. 1001 12ME-7VM400AFA-1001 English Table of Content Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Chapter 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 GA-7VM400A-FA Motherboard Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] It allows you to limit access to the system and Setup, or just to Setup. Set User password Change, set, or disable password. It allows you to limit access to the system. Save & Exit Setup Save CMOS value settings to CMOS and exit setup. Exit Without Saving Abandon all CMOS value changes and exit setup. - 33 - BIOS Setup English Standard CMOS Features CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Date (mm:dd:yy) Time (hh:mm:ss) IDE Primary Master IDE Primary Slave IDE Secondary Master IDE Secondary Slave Drive A Drive B Floppy 3 Mode Support Halt On Base Memory Extended Memory Total Memory Mon, Jan 12 2004 22:31:24 [None] [None] [None] [None] [1. 44M, 3. 5 "] [None] [Disabled] <Day> [All, But Keyboard] 640K 130048K 131072K <Year> 1999 to 2098 F1:General Help 1 to 31 (or maximum allowed in the month) <Week> Sun. Item Help Menu Level Change the day, month, year : Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 2: Standard CMOS Features Date The date format is <week>, <month>, <day>, <year>. Week Month Day Year The week, from Sun to Sat, determined by the BIOS and is display only The month, Jan. The day, from 1 to 31 (or the maximum allowed in the month) The year, from 1999 through 2098 Time The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-time clock. is 13:00:00. GA-7VM400A-FA Motherboard - 34 - IDE Primary Master, Slave / Secondary Master, Slave The category identifies the types of hard disk from drive C to F that has been installed in the computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type which will automatically detect HDD type. Note that the specifications of your drive must match with the drive table. The hard disk will not work properly if you enter improper information for this category. If you select User Type, related information will be asked to enter to the following items. Enter the information directly from the keyboard and press <Enter>. Such information should be provided in the documentation form your hard disk vendor or the system manufacturer. Capacity: Access Mode: Cylinder: Head Precomp Landing Zone SECTORS The hard disk size. The options are: Auto / Large / LBA / Normal. The read / Write head number of hard disk. The cyliner number at which the disk driver changes the write current. The cylinder number that the disk driver heads(read/write) are seated when the disk drive is parked. The sector number of each track define on the hard disk. If a hard disk has not been installed select NONE and press <Enter>. English Drive A / Drive B The category identifies the types of floppy disk drive A or drive B that has been installed in the computer. No floppy drive installed 5. 25 inch PC-type standard drive; 360K byte capacity. [. . . ] If you use Incorrect using it may cause your system broken. (Default value) English AGP OverVoltage Control Normal +0. 1V +0. 2V +0. 3V Set AGP OverVoltage Control to Normal. (Default value) Set AGP OverVoltage Control to +0. 1V. Set AGP OverVoltage Control to +0. 3V. DIMM OverVoltage Control Auto +0. 1V +0. 2V +0. 3V Supply voltage as DRAM module reguired. [. . . ]