User manual GIGABYTE GA-7ZMMHC

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GIGABYTE GA-7ZMMHC. We hope that this GIGABYTE GA-7ZMMHC user guide will be useful to you.

Lastmanuals help download the user guide GIGABYTE GA-7ZMMHC.


Mode d'emploi GIGABYTE GA-7ZMMHC
Download
Manual abstract: user guide GIGABYTE GA-7ZMMHC

Detailed instructions for use are in the User's Guide.

[. . . ] FCC Compliance Statement: This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Number of cylinders HEADS number of heads PRECOMP write precomp LANDZONE Landing zone SECTORS number of sectors If a hard disk has not been installed select NONE and press <Enter>. · Floppy Drive A / Drive B The category identifies the type of floppy disk drive A or drive B that has been installed in the computer. No floppy drive installed 5. 25 inch PC-type standard drive; 360K byte capacity. 5. 25 inch AT-type high-density drive; 1. 2M byte capacity (3. 5 inch when 3 Mode is Enabled). 3. 5 inch double-sided drive; 720K byte capacity 3. 5 inch double-sided drive; 1. 44M byte capacity. 3. 5 inch double-sided drive; 2. 88M byte capacity. 44 7ZMMHC Motherboard · Boot Sector Virus Protection If it is set to enable, the category will flash on the screen when there is any attempt to write to the boot sector or partition table of the hard disk drive. The system will halt and the following error message will appear in the mean time. You can run anti-virus program to locate the problem. Enabled Activate automatically when the system boots up causing a warning message to appear when anything attempts to access the boot sector or hard disk partition table No warning message to appear when anything attempts to access the boot sector or hard disk partition table. (Default Value) Disabled · Memory The category is display-only which is determined by POST (Power On Self Test) of the BIOS. Base Memory The POST of the BIOS will determine the amount of base (or conventional) memory installed in the system. The value of the base memory is typically 512 K for systems with 512 K memory installed on the motherboard, or 640 K for systems with 640 K or more memory installed on the motherboard. Extended Memory The BIOS determines how much extended memory is present during the POST. This is the amount of memory located above 1 MB in the CPU's memory address map. Other Memory This refers to the memory located in the 640 K to 1024 K address space. This is memory that can be used for different applications. DOS uses this area to load device drivers to keep as much base memory free for application programs. Most use for this area is Shadow RAM 45 BIOS Setup BIOS Features Setup AMIBIOS SETUP ­ BIOS FEATURES SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved 1st Boot Device Floppy 2nd Boot Device IDE-0 3rd Boot Device CDROM S. M. A. R. T. for Hard Disks Disabled BootUp Num-Lock On Floppy Drive Seek Disabled Password Check Setup BIOS Flash Protection Auto ESC : Quit F1 : Help F5 :Old Values F6 : Fail-Safe F7 : Optimized : Select Item PU/PD/+/- : Modify (Shift)F2:Color F8: Flash Utility Figure 3: BIOS Features Setup · 1st / 2nd / 3rd Boot Device Floppy ZIP A: / LS120 CDROM SCSI NETWORK USB FDD IDE-0~IDE-3 Disabled ATAPI ZIP C: Set your boot device priority to Floppy. Set your boot device priority to ZIP A: / LS120. Set your boot device priority to NETWORK. Set your boot device priority to USB FDD. Set your boot device priority to IDE-0~IDE-3. Set your boot device priority to ATAPI ZIP C:. · S. M. A. R. T. for Hard Disks Enabled Disabled Enabled S. M. A. R. T. [. . . ] It can help you check out which kind of motherboard and which brand of Flash ROM are supported. In method I, if it shows two or more motherboard's model names to be selected, please make sure your motherboard's model name again. Selecting wrong model name will cause the system unbooted. In method II, be sure that motherboard's model name in BIOS unzip file are the same as your motherboard's. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GA-7ZMMHC

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GA-7ZMMHC will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag