User manual GIGABYTE GA-8GEM800

[. . . ] GA-8GEM800 Intel® Pentium® 4 Socket 478 Processor Motherboard User's Manual Rev. 1001 12ME-8GEM800-1001 Motherboard GA-8GEM800 Motherboard GA-8GEM800 Sept. 1, 2004 Copyright © 2004 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. [. . . ] The option will display "Locked" and read only if the CPU ratio is not changeable. CPU Host Clock Control Please note that if your system is overclocked and cannot restart, please wait 20 secs. for automatic system restart or clear the CMOS setup data and perform a safe restart. Disabled Disable CPU Host Clock Control. (Default value) Enabled Enable CPU Host Clock Control. CPU Host Frequency (Mhz) This item will be available when "CPU Host Clock Control" is set to Enabled. 100MHz ~ 355MHz Set CPU Host Clock from 100MHz to 355MHz. Inappropriate using it may cause your system corrupted. For power End-User use only! Fixed PCI/AGP Frequency You can choose those modes to adjust PCI/AGP frequency. (Select PCI/AGP frequency asynchronous with CPU frequency). - 43 - BIOS Setup English Host/DRAM Clock ratio For FSB (Front Side Bus) frequency=400MHz, 2. 0 Memory Frequency = Host clock X 2. 0. 2. 66 Memory Frequency = Host clock X 2. 66. Auto Set Memory frequency by DRAM SPD data. (Default value) For FSB (Front Side Bus) frequency=533MHz, 2. 0 Memory Frequency = Host clock X 2. 0. 2. 5 Memory Frequency = Host clock X 2. 5. Auto Set Memory frequency by DRAM SPD data. (Default value) Memory Frequency (Mhz) The values depend on CPU Host Frequency. PCI/AGP Frequency (Mhz) The values depend on Fixed PCI/AGP Frequency. 2-8 } } } } } } } Top Performance CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Top Performance Integrated Peripherals Disabled. . . . . . . . . . . . . . . . . . . . . . . . . [n] Power Management Setup PnP/PCI Configurations Enabled. . . . . . . . . . . . . . . . . . . . . . . . . . [ ] PC Health Status Frequency/Voltage Control hi: Move ESC: Abort Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving ENTER: Accept higf: Select Item F10: Save & Exit Setup Load Fail-Safe Defaults Esc: Quit F8: Q-Flash If you wish to maximize the performance of your system, enable "Top Performance. " Disabled Disable this function. (Default Value) Enabled Enable Top Performance function. "Top Performance" will increase H/W working speed. Different system configuration (both H/W component and OS) will effect the result. For example, the same H/W configuration might not run properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not perform enough, the reliability or stability problem will appear sometimes, and we will recommend you disabling the option to avoid the problem as mentioned above. GA-8GEM800 Motherboard - 44 - 2-9 } } } } } } } Load Fail-Safe Defaults CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Load Fail-Safe DefaultsSet UserN (Y/N)?Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Load Fail-Safe Defaults English Esc: Quit F8: Q-Flash Fail-Safe defaults contain the most appropriate values of the system parameters that allow minimum system performance. 2-10 Load Optimized Defaults CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations PC Health Status Frequency/Voltage Control Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Load Optimized Defaults (Y/N)?N Set User Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Load Optimized Defaults Esc: Quit F8: Q-Flash Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. - 45 - BIOS Setup English 2-11 Set Supervisor/User Password CMOS Setup Utility-Copyright (C) 1984-2004 Award Software } } } } } } } Standard CMOS Features Advanced BIOS Features Integrated Peripherals Power Management Setup PnP/PCI Configurations Enter Password: PC Health Status Frequency/Voltage Control Top Performance Load Fail-Safe Defaults Load Optimized Defaults Set Supervisor Password Set User Password Save & Exit Setup Exit Without Saving higf: Select Item F10: Save & Exit Setup Change/Set/Disable Password Esc: Quit F8: Q-Flash Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically detects. When you select this function, the following message will appear at the center of the screen to assist you in creating a password. [. . . ] Support : http://www. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address : http://www. giga-byte. com -- Germany G. B. T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm 112 22047 Hamburg TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech. ) TEL: +49-40-25492343 (Sales) +49-1803-428329 (Tech. ) Tech. Support : http://de. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. [. . . ]