User manual GIGABYTE GA-8IE533

[. . . ] When you installing AGP card, please make sure the follow ing notice is fully understood and practiced. If your AGP card has "AGP 4X notch"(show below), please make sure your AGP card is AGP 4X (1. 5V). Caution: AGP 2X(3. 3V) card is not supported by Intel® 845 (E/G)/ Intel® 850(E) . You might experience system unable to boot up normally. Please insert an AGP 4X/8X(1. 5V) card Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot. [. . . ] M This feature requires anATX pow er supply that provides at least 1A on the +5VSB lead. 8Disabled 8Enabled Disabled PME Ev ent Wake up function. (Default Value) F Modem Ri ng On M An incoming call v ia modem awakes the sy stem from its soft-off mode. 8Disabled 8Enabled Disabled Modem Ring On function. (Default Value) FResume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to pow er on sy stem. 8Disabled 8Enabled Disable this function. (Default Value) Enable alarm function to POWER ON sy stem. GA-8IE533 Motherboard - 34 - If RTC Alarm Lead To Pow er On is Enabled. Date ( of Month) Alarm : Time ( hh: mm: ss) Alarm : Everyday , 1~31 (0~23) : (0~59) : (0~59) English F Power On By Mouse 8Disabled 8Mouse Click Disabled this function. (Default v alue) Set mouse double click to pow er on sy stem. F Power On By Keyboard This feature allow s you to set the method for powering-on the system. The option "Password" allow s you to set up to 5 alphanumeric characters to power-on the system. The option "Any Key" allows y ou to touch the key board to power on the system. The option "Keyboard 98" allows you to use the standard keyboard 98 to power on the system. 8Password 8Disabled 8Key board 98 Enter from 1 to 5 characters to set the Key board Pow er On Password. (Default v alue) If y our keyboard have "POWER Key "button, y ou can press the key to pow er on y our sy stem. F KB Power ON Pas sword 8Enter Input passw ord (from 1 to 5 characters) and press Enter to set the Key board Pow er On Passw ord. . FAC Back Function 8Memory 8Soft-Off 8Full-On Sy stem power on depends on the status before AC lost. (Default v alue) Alw ays pow er on the system when AC back. - 35 - BIOS Setup English PnP/PCI Configurations CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are PnP/PCI Configurations PCI1/PCI5 IRQ Assignment PCI2 IRQ Assignment PCI3 IRQ Assignment PCI4 IRQ Assignment [Auto] [Auto] [Auto] [Auto] Item Help MenuLev el higf: Mov e Enter:Select +/-/PU/PD:Value F10:Sav e ESC:Ex it F1:General Help F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 6: PnP/PCI Configurations FPCI1/PCI5 IRQ Assi gnment 8Auto 83, 4, 5, 7, 9. , 10, 11, 12, 15 Auto assign IRQ to PCI 1/ PCI 5. (Default v alue) Set 3, 4, 5, 7, 9, 10, 11, 12, 15 to PCI1/ PCI5. FPCI2 IRQ Assi gnment 8Auto 83, 4, 5, 7, 9. , 10, 11, 12, 15 Auto assign IRQ to PCI 2. (Default v alue) Set 3, 4, 5, 7, 9, 10, 11, 12, 15 to PCI2. FPCI3 IRQ Ass ignment 8Auto 83, 4, 5, 7, 9. , 10, 11, 12, 15 Auto assign IRQ to PCI 3. (Default v alue) Set 3, 4, 5, 7, 9, 10, 11, 12, 15 to PCI3. FPCI4 IRQ Ass ignment 8Auto 83, 4, 5, 7, 9. , 10, 11, 12, 15 Auto assign IRQ to PCI 4. (Default v alue) Set 3, 4, 5, 7, 9, 10, 11, 12, 15 to PCI4. GA-8IE533 Motherboard - 36 - English PC Health Status CMOS Setup Utility -Copy right (C) 1984-2002 Aw ard Softw are PC Health Status Reset Case Open Status CaseOpened VCORE Vcc18 +3. 3V +5V +12V Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN Speed CPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN Fail Warning [Dis abled] No MenuLev el 1. 8. 26V 1. 776V 3. 296V 5. 053V 11. 840V 37°C 6490 RPM 0 RPM Disabled Disabled Disabled Item Help higf: Mov e Enter:Select +/-/PU/PD:Value F10:Save ESC:Ex it F1:General Help F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure7: PC Health Status CReset Case Open Status CCase Opened If the case is closed, "Case Opened" w ill show "No". If the case hav e been opened, "Case Opened" w ill show "Yes". If y ou w ant to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and sav e CMOS, y our computer w ill restart. Disabled : Don'reset case open status. ;Enabled : Clear case open status at nex t boot. t C Current Voltage (V) VCORE / Vcc18 /+3. 3V / +5 V / +12V 8Detect sy stem' v oltage status automatically . s - 37 - BIOS Setup English CCurrent CPU Temperature 8Detect CPU Temp. [. . . ] Please select the other settings for 6 channels output. - 69 - Technical Reference English SPDIF Output Device (Optional Device) A "SPDIF output" device is available on the motherboard. Cable with rear bracket is provided and could link to the "SPDIF output" connector (As picture. ) For the further linkage to decoder, rear bracket provides coaxial cable and Fiber connecting port. 1. Connect the SPDIF output device to the rear bracket of PC, and fix it with screw. 2. Connect SPDIF wire to the motherboard. 3. [. . . ]