User manual GIGABYTE GA-8IG1000MT

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GIGABYTE GA-8IG1000MT. We hope that this GIGABYTE GA-8IG1000MT user guide will be useful to you.

Lastmanuals help download the user guide GIGABYTE GA-8IG1000MT.

Download

Manual abstract: user guide GIGABYTE GA-8IG1000MT

Detailed instructions for use are in the User's Guide.

 [. . . ] When you installing AGP card,  please make sure the following notice is fully understood and practiced. If your AGP card has "AGP 4X/8X (1. 5V) notch"(show below),  please make sure your AGP card is AGP 4X/8X (1. 5V). 

AGP 4 X/8 X notc h

Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/G) / 850(E) /E7205 / 865(P/G/PE) / 875P. You might experience system unable to boot up normally. Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot.  [. . . ] (Default v alue) Enable onboard Serial port 2 and address is 3E8. Enable onboard Serial port 2 and address is 2E8. Disable onboard Serial port 2. 

UART Mode Select
This item allow s y ou to determine w hich Infra Red(IR) function of Onboard I/O chip. Normal IrDA ASKIR SCR Set onboard I/O chip UAR T to Norm al Mode. (Default Value) Set onboard I/O chip UAR T to IrDA Mode. Set onboard I/O chip UART to ASKIR Mode. Set onboard I/O chip U ART to SCR Interface. 

UR2 Dupl ex Mode
This feature allow s y ou to sec lect IR mode. This function w ill av ailable w hen "UART Mode Select" does n't set at Normal/SCR. (Default Value) IR F unction Duplex F ull. 

Onboard Parallel port
This feature allow s y ou to select from a giv en set of parameters if the parallel port uses the onboard I/O controller. Disabled 378/ IRQ7 278/ IRQ5 3BC/ IRQ7 Disable onboard LPT port. Enable onboard LPT port and address is 378/IRQ7. (Default Value) Enable onboard LPT port and address is 278/ IRQ5. Enable onboard LPT port and address is 3BC/ IRQ7. 

GA-8IG1000MT Motherboard

- 44 -

8ig1000mt_1001_b. p65

44

2003/4/15,  ¤U¤È 03:11

Parallel Port Mode
This feature allow s y ou to connect w ith an adv anc ed printer v ia the port mode it supports. SPP EPP ECP ECP+EPP Using Parallel port as Standard Parallel Port. (Default Value) Using Parallel port as Enhanced Parallel Port. Using Parallel port as Ex tended Capabilities Port. Using Parallel port as ECP & EPP mode. 

English

ECP Mode Use DMA
This feature allow s y ou to select Direc t Memory Access (DMA) channel if the ECP mode s elected. This function w ill av ailable w hen "Parallel Port Mode" set at ECP or ECP+EPP. (Default Value) Set ECP Mode Use DMA to 1. 

Game Port Address
201 209 Disabled Set Game Port Address to 201. (Default Value) Set Game Port Address to 209. Disable this function. 

Midi Port Address
300 330 Disabled Set M idi Port Address to 300. (Default Value) Disable this function. 

Midi Port IRQ
5 10 Set Midi Port IRQ to 5.  [. . . ] No
Plug the C PU cooling fan power in the CP U fan connector. Plug in the AC pow er connector. 

Check if the CPU cooling fan attached to CPU properly. ls CPU cooling fan power connected to CPU_FAN properly?No
I nsert and push the memory module vertically into the DI MM slot. 

Check if the memory install properly into the DIMM slot.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GA-8IG1000MT

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GA-8IG1000MT will begin.