User manual GIGABYTE GA-8IGML-T

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GIGABYTE GA-8IGML-T. We hope that this GIGABYTE GA-8IGML-T user guide will be useful to you.

Lastmanuals help download the user guide GIGABYTE GA-8IGML-T.

Download

Manual abstract: user guide GIGABYTE GA-8IGML-T

Detailed instructions for use are in the User's Guide.

 [. . . ] When you installing AGP card,  please make sure the following notice is fully understood and practiced. If your AGP card has "AGP 4X notch"(show below),  please make sure your AGP card is AGP 4X (1. 5V). 

Do not use AGP 2X card (3. 3V) in this motherboard. It will burn and damage the motherboard due to Intel® 845(E/G) / 850(E) chipset can't support AGP 2X(3. 3V). Example 1: Diamond Vipper V770 golden finger is compatible with 2X/ 4X mode AGP slot.  [. . . ] Disable onboard Serial port 1. 

C Onboard Serial Port 2
8Auto 83F8/IRQ4 82F8/IRQ3 83E8/IRQ4 82E8/IRQ3 8Disabled BIOS will automatically setup the port 2 address. Enable onboard Serial port 2 and address is 3F8. Enable onboard Serial port 2 and address is 2F8. (Default value) Enable onboard Serial port 2 and address is 3E8. Enable onboard Serial port 2 and address is 2E8. Disable onboard Serial port 2. 

"*" Not support for GA-8IGML-T-C
GA-8IGML-T series Motherboard - 32 -

C UART Mode Select
(This item allows you to determine which Infra Red(IR) function of Onboard I/O chip)
8ASKIR 8IrDA 8Normal Set onboard I/O chip UART to ASKIR Mode. Set onboard I/O chip UART to Normal Mode. (Default Value)

English

C UR2 Duplex Mode
8Half 8Full IR/ASKIR Function Duplex Half. (Default Value) IR/ASKIR Function Duplex Full. 

C Onboard Parallel port
8378/IRQ7 8278/IRQ5 8Disabled 83BC/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default Value) Enable onboard LPT port and address is 278/IRQ5. Enable onboard LPT port and address is 3BC/IRQ7. 

CParallel Port Mode
8SPP 8EPP 8ECP 8ECP+EPP Using Parallel port as Standard Parallel Port. (Default Value) Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. Using Parallel port as ECP & EPP mode. 

CECP Mode Use DMA
83 81 Use DMA channel 3 for ECP Mode. (Default Value) Use DMA channel 1 for ECP Mode. 

CGame Port Address
8201 8Disabled Set Game Port Address to 201. (Default Value) Disable this function. 

CMidi Port Address
8290 8300 8330 8Disabled Set Midi Port Address to 290. Set Midi Port Address to 330. (Default Value) Disable this function. 

- 33 -

BIOS Setup

English

CMidi Port IRQ
85 810 Set Midi Port IRQ to 5. (Default Value)

GA-8IGML-T series Motherboard

- 34 -

English

Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2002 Award Software Power Management Setup ACPI Suspend Type Power LED in S1 state Soft-Off by PWR_BTTN PME Event Wake Up ModemRingOn/WakeOnLan Resume by Alarm x Date (of Month) Alarm x Time (hh:nn:ss) Power On By Mouse Power On By Keyboard x KB Power ON Password AC Back Function S1(POS) Blinking Instant-Off Enabled Enabled Disabled Everyday 000 Disabled Disabled Enter Soft-Off Item Help Menu Level u [S1] Set suspend type to Power On Suspend under ACPI OS [S3] Set suspend type to Suspend to RAM under ACPI OS

higf: Move

Enter:Select +/-/PU/PD:Value F10:Save

ESC:Exit

F1:General Help

F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 5: Power Management Setup

C ACPI Suspend Type
8S1(POS) 8S3(STR) Set Suspend type to Power On Suspend under ACPI OS. (Default Value) Set Suspend type to Suspend To RAM under ACPI OS. 

C Power LED in S1 state
8Blinking 8Dual/Off In standby mode(S1),  power LED will blink. If use single color LED,  power LED will turn off. If use dual color LED,  power LED will turn to another color. 

C Soft-off by PWR_BTTN
8Instant-off Press power button then Power off instantly. Enter suspend if button is pressed less than 4 sec.  [. . . ] Microsoft(R) Windows98 © Copyright Microsoft Corp 1981-1999 A:\> dir/w Volume in drive A has no label Volume Serial Number is 16EB-353D Directory of A:\ COMMAND. COM 3 file(s) 0 dir(s) 7VTX. F4 FLASH841. EXE

838, 954 bytes 324, 608 bytes free

A:\> Flash841 7VTX. F4 (2) Now screen appears the following Flash Utility main menu. Press "Enter",  the highlighted item will locate on the model name of the right-upper screen. Right after that,  press "Enter" to start BIOS Flash Utility. 

GA-8IGML-T series Motherboard

- 70 -

(3) It will pop up a screen and asks "Are you sure to flash the BIOS?" Press [Enter] to continue the procedure,  or press [ESC] to quit. Beware: Please do not turn off the system while you are upgrading BIOS.  [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GA-8IGML-T

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GA-8IGML-T will begin.