User manual GIGABYTE GA-8IPE1000-G

[. . . ] GA-8IPE1000 Series Intel® Pentium® 4 Processor Motherboard User's Manual Rev. 4002 12ME-8IPE1K4-4002 Motherboard GA-8IPE1000-G / GA-8IPE1000-L / GA-8IPE1000 Motherboard GA-8IPE1000-G / GA-8IPE1000-L / GA-8IPE1000 Nov. 2004 Copyright © 2004 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in the manual are legally registered to their respective companies. Notice The written content provided with this product is the property of Gigabyte. [. . . ] If use dual color LED, power LED will turn to another color. Press power button then Power off instantly. (Default value) Press power button 4 seconds to Power off. Enter suspend if button is pressed less than 4 seconds. When AC-power back to the system, the system will be in "Off" state. (Default value) When AC-power back to the system, the system always in "On" state. When AC-power back to the system, the system will return to the Last state before AC-power off. Power LED in S1 state Off by Power button Instant-off Delay 4 Sec. AC BACK Function Soft-Off Full-On Memory PME Event Wake Up This feature requires an ATX power supply that provides at least 1A on the 5VSB lead. (Default value) ModemRingOn An incoming call via modem can awake the system from any suspend state. Disabled Disable Modem Ring On function. (Default value) - 39 - BIOS Setup English Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Date/Time to power on system. (Default value) Enabled Enable alarm function to POWER ON system. If RTC Alarm Lead To Power On is Enabled. Date (of Month) Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) POWER ON Function Disabled Any KEY Mouse Mouse/Any KEY Disable this function. (Default value) Press any key to power on the system. Double click on mouse left button to power on the system. Press any key or double click on mouse left button to power on the system. GA-8IPE1000 Series Motherboard - 40 - 2-5 PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PnP/PCI Configurations PCI 1/5 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment PCI 4 IRQ Assignment [Auto] [Auto] [Auto] [Auto] Item Help Menu Level Device(s) using this INT: English : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Save Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults PCI 1/5 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 1/5. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 1/5. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 2. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 3. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 4. PCI 2 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 PCI 3 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 PCI 4 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 - 41 - BIOS Setup English 2-6 PC Health Status CMOS Setup Utility-Copyright (C) 1984-2004 Award Software PC Health Status Current CPU Temperature Vcore DDR25V +3. 3V +12V Current CPU FAN Speed Current SYSTEM FAN Speed 50oC 1. 35V 2. 39V 3. 28V 12. 09V 3308 RPM 0 RPM Item Help Menu Level : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Save Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Current CPU Temperature Detect CPU temperature automatically. Current Voltage(V) Vcore / DDR25V / +3. 3V / +12V Detect system's voltage status automatically. Current CPU/SYSTEM FAN Speed (RPM) Detect CPU/SYSTEM fan speed status automatically. GA-8IPE1000 Series Motherboard - 42 - 2-7 Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2004 Award Software Frequency/Voltage Control [15X] [Disabled] 133 66/33/100 [Auto] 266 66/33/100 [Normal] [Normal] [Normal] Item Help Menu Level Set CPU Ratio if CPU Ratio is unclocked English CPU Clock Ratio CPU Host Clock Control x CPU Host Frequency (Mhz) x AGP/PCI/SRC Fixed Memory Frequency For Memory Frequency (Mhz) AGP/PCI/SRC Frequency (Mhz) DIMM OverVoltage Control AGP OverVoltage Control CPU OverVoltage Control : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Save Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Incorrect using these features may cause your system broken. For power end-user use only. CPU Clock Ratio This setup option will automatically assign by CPU detection. The option will display "Locked" and read only if the CPU ratio is not changeable. CPU Host Clock Control Disabled Enabled Disable CPU host clock control. [. . . ] Support : http://www. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address : http://www. giga-byte. com Germany G. B. T. TECHNOLOGY TRADING GMBH Address: Friedrich-Ebert-Damm 112 22047 Hamburg Deutschland TEL: +49-40-2533040 (Sales) +49-1803-428468 (Tech. ) FAX: +49-40-25492343 (Sales) +49-1803-428329 (Tech. ) Tech. Support : http://de. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. [. . . ]