Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GIGABYTE GA-8ITML. We hope that this GIGABYTE GA-8ITML user guide will be useful to you.
Lastmanuals help download the user guide GIGABYTE GA-8ITML.
Detailed instructions for use are in the User's Guide.
[. . . ] When you installing AGP card, please make sure the following notice is fully understood and practiced. If your AGP card has "AGP 4X notch"(show below), please make sure your AGP card is AGP 4X (1. 5V).
Do not use AGP 2X card (3. 3V) in this motherboard. It will burn and damage the motherboard due to Intel® 850 chipset can't support AGP 2X(3. 3V). Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot. [. . . ] Set Front Side Bus Clock (MHz) to 115. 00. Set Front Side Bus Clock (MHz) to 118. 00. Set Front Side Bus Clock (MHz) to 120. 00. Set Front Side Bus Clock (MHz) to 133. 33.
33
GA-8ITML Motherboard
CPU Frequency Ratio
8:1, 10:1~24:1 (Default Value: 8:1)
RDRAM Bus Frequency
Auto 400MHz 300MHz Set RDRAM Bus Frequency automatically. (Default Value) Set RDRAM Bus Frequency to 400MHz. (If the current RDRAM is supported) Set RDRAM Bus Frequency to 300MHz. (If the current RDRAM is supported)
Over RIMM Voltage
Disabled Enabled Disable this funciton. (Default Value) Enable Over RIMM Voltage function.
Memory ECC Mode
Enabled Disabled Enable Memory Data Check ECC Mode. (Default Value)
Graphics Aperture
4 MB 8 MB 16 MB 32 MB 64 MB 128 MB 256 MB Display Graphics Aperture Size is 4MB. (Default Value) Display Graphics Aperture Size is 128MB. Display Graphics Aperture Size is 256MB.
34
BIOS Setup
Delayed Transaction
Enabled Disabled Enable PCI 2. 1 features including release and delayed transaction for the chipset. (Default Value)
DMA Collection Buffer
Enabled Disabled Enable DMA collection buffer for LPC I/F and PC/PCI DMA. (Default Value) Disable this function.
35
GA-8ITML Motherboard
Power Management Setup
AMIBIOS SETUP - POWER MANAGEMENT SETUP ( C ) 1999 American Megatrends, Inc. All Rights Reserved ACPI Sleep Type USB Dev Wakeup From S3 Suspend Time Out (Minute) Throttle Slow Clock Ratio Soft-Off by Power Button System After AC Back ModemRingOn/WakeOnLan PME Event Wake Up Resume by RTC Alarm RTC Alarm Date RTC Alarm Hour RTC Alarm Minute RTC Alarm Second KB & PS/2 Mouse Access FDC/LPT/COM Ports Access Pri. Slave IDE Access PIRQ[A] IRQ Active : S1/POS : Disabled : Disabled : 50. 0% : Instant Off : Off : Enabled : Enabled : Disabled : Event Day : 00 : 00 : 00 : Monitor : Monitor : Monitor : Ignore : Monitor : Ignore : Ignore ESC: Quit F1 : Help : Select Item PU/PD+/-/ : Modify PIRQ[B] IRQ Active : Ignore PIRQ[C] IRQ Active : Ignore PIRQ[D] IRQ Active : Ignore
F5 : Old Values (Shift)F2: Color F6 : Load Fail-Safe Defaults F7 : Load Optimized Defaults
Figure 5: Power Management Setup
36
BIOS Setup
ACPI Sleep Type
S1/POS S3/STR Set ACPI Sleep Type to S1/POS (Power On Suspend). (Default value) Set ACPI Sleep Type to S3/STR (Suspend To RAM).
USB Dev Wakeup From S3
Enabled Disabled Enable USB Device Wakeup From S3. (Default value)
Suspend Time Out
Disabled 1Minute ~ 60 Minute Disable the timer to enter suspend mode. (Default Value) Set the timer to enter suspend mode.
Throttle Slow Clock Ratio
12. 5%/25. 0%/37. 5%/50. 0% (Default Value)/62. 5%/75. 0%/87. 5%
Soft-off by Power Button
Instant off Suspend The user press the power button once, he can turn off the system. (Default Value) The user press the power button once, then he can enter suspend mode.
System after AC Back
Off On Last State When AC-power back to the system, the system will be in "Off" state. (Default Value) When AC-power back to the system, the system will be in "On" state. When AC-power back to the system, the system will return to the Last state before AC-power off.
ModemRingOn/WakeOnLan
Disabled Enabled Disable Modem Ring On / Wake On LAN function. The modem ring / LAN wake up will bring the system out of soft-off or suspend state if this option is set "Enabled". (Default Value)
37
GA-8ITML Motherboard
PME Event Wake up
Disabled Enabled Disable PME event wake up function. [. . . ] Besides, different from other traditional over-clocking methods, EasyTuneIII doesn't require users to change neither BIOS nor hardware switch/ jumper setting; on the other hand, they can do "overdrive" at only one click. Therefore, this is a safer way for "overdrive" as nothing is changed on software or hardware. If user runs EasyTuneIII over system's limitation, the biggest lost is only to restart the computer again and the side effect is then well controlled. Moreover, if one well-performed system speed been tested in EasyTuneIII, user can "Save" this bus speed and "Load" it in next time. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GA-8ITML
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GA-8ITML will begin.