Detailed instructions for use are in the User's Guide.
[. . . ] When you installing AGP card, please make sure the following notice is fully understood and practiced. If your AGP card has "AGP 4X/8X(1. 5V) notch"(show below), please make sure your AGP card is AGP 4X/8X(1. 5V).
AGP 4X/8X notch
Caution: AGP 2X card is not supported by SiS® 648. You might experience system unable to boot up normally. Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot. [. . . ] (Default Value)
C PME Event Wake Up
8Disabled 8Enabled Disable this function. (Default Value)
C Power On by Keyboard
8Passw ord Input passw ord (from 1 to 8 characters) and press Enter to set the Key board Pow er On Passw ord. 8Any Key 8Disabled Set Key board pow er on by any key . (Default Value)
CPower On by Mouse
8Enabled 8Disabled Enable Pow er On by Mouse function. (Default Value)
C Resume by Alarm
You can set "Resume by Alarm" item to enabled and key in Data/time to pow er on sy stem. 8Disabled 8Enabled Disable this function. (Default Value) Enable alarm function to POWER ON sy stem.
If RTC Alarm Lead To Pow er On is Enabled. Month Alarm : Day (of Month) : Time ( hh: mm: ss) : NA, 1~12 1~31 (0~23) : (0~59) : (0~59)
C Power LED i n S1 state
8Blinking 8Dual/OFF In standby mode(S1), pow er LED w ill blink. If use single color LED, pow er LED w ill turn off. If use dual color LED, pow er LED w ill turn to another color. GA-8648(-L) Motherboard - 42 -
English
PnP/PCI Configurations
CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are PnP/PCI Configurations PCI 4 IRQ Assignment PCI 1/5 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment [Auto] [Auto] [Auto] [Auto] Item Help Menu Lev el u
higf: Mov e
Enter:Select +/-/PU/PD:Value F10:Sav e F6:Fail-Safe Defaults
ESC:Ex it
F1:General Help
F5:Prev ious Values
F7:Optimized Defaults
Figure 6: PnP/PCI Configurations
C PCI 4 IRQ Assignment
8Auto 83, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 4. (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 4.
C PCI 1/5 IRQ Assignment
8Auto 83, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 1/5. (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 1/5.
C PCI 2 IRQ Assignment
8Auto 83, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 2. (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 2.
C PCI 3 IRQ Assignment
8Auto 83, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 3. (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 3.
- 43 -
BIOS Setup
English
PC Health Status
CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are PC Health Status Reset Case Open Status Case Opened VCORE VCC18 +3. 3V +5V +12V Current Sy stem Temperature Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN Speed CPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN Fail Warning higf: Mov e [Disabled] No 1. 778V 1. 856V 3. 2V 4. 945V 12. 288V 33°C 45°C 5113 RPM 0 RPM [Disabled] [Disabled] [Disabled] ESC:Ex it F1:General Help [Enabled] Clear case open status at nex t boot Item Help Menu Lev el u [Disabled] Don' reset case t open status
Enter:Select +/-/PU/PD:Value F10:Sav e
F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 7: PC Health Status
C Reset Case Open Status C Case Opened
If the case is closed, "Case Opened" w ill show "No". If the case hav e been opened, "Case Opened" w ill show "Yes". If y ou w ant to reset "C ase Opened" v alue, set "Res et Case Open Status" to "Enabled" and sav e CMOS, y our computer w ill restart.
C Current Voltage (V) VCORE / VCC18 / +3. 3V / +5V / +12V
8Detec t sy stem' s v oltage status automatic ally .
GA-8648(-L) Motherboard
- 44 -
C Current System / CPU Temperature
8Detec t Sy stem /CPU temperature automatic ally .
English
C Current CPU/SYSTEM FAN Speed (RPM)
8Detec t CPU/Sy stem Fan speed status automatic ally .
C CPU Warning Temperature
8Disabled 860°/140°F 870°/158°F 880°/176°F 890°/194°F Don't monitor CPU's temperature. (Default v alue) Alarm w hen CPU current temperature ov er than 60°/140°F. Alarm w hen CPU current temperature ov er than 70°/158°F. Alarm w hen CPU current temperature ov er than 80°/176°F. Alarm w hen CPU current temperature ov er than 90°/194°F.
C CPU FAN Fail Warning
8Disabled 8Enabled Fan Warning function disable. (Default v alue) Enalbe FAN w arning alarm w hen FAN s tops.
C SYSTEM FAN Fail Warning
8Disabled 8Enabled Fan Warning function disable. [. . . ] No
Plug the CPU cooling fan power in the CPU fan connector. Plug in the AC power connector.
Check if the CPU cooling fan attached to CPU properly. ls CPU cooling fan power connected to CPU_FAN properly?No
Insert and push the memory module vertically into the DIMM slot.
Check if the memory install properly into the DIMM slot. [. . . ]