User manual GIGABYTE GA-8SIMLH-P

[. . . ] M The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. M Third-party brands and names are the property of their respective owners. M Please do not remove any labels on motherboard, this may void the warranty of this motherboard. M Due to rapid change in technology, some of the specifications might be out of date beforepublication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] 8Off When AC-pow er back to the sy stem, the sy stem w ill be in "Off" state. (Default Value) 8On When AC-pow er back to the sy stem, the sy stem w ill be in "On" state. - 43 BIOS Setup English C IRQ [3-7, 9-15], NMI 8Disabled 8Enabled Disable this function. (Default v alue) C ModemRingOn 8Disabled 8Enabled Disable Modem Ring on function. (Default Value) C PME Event Wake Up 8Disabled 8Enabled Disable this function. (Default Value) C Power On by Keyboard 8Passw ord Input passw ord (from 1 to 8 characters) and press Enter to set the Key board Pow er On Passw ord. 8Any Key 8Disabled Set Key board pow er on by any key . (Default Value) CPower On by Mouse 8Enabled 8Disabled Enable Pow er On by Mouse function. (Default Value) C Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to pow er on sy stem. 8Disabled 8Enabled Disable this function. (Default Value) Enable alarm function to POWER ON sy stem. If RTC Alarm Lead To Pow er On is Enabled. Month Alarm : Day (of Month) : Time ( hh: mm: ss) : NA, 1~12 1~31 (0~23) : (0~59) : (0~59) C Power LED i n S1 state 8Blinking 8Dual/OFF In standby mode(S1), pow er LED w ill blink. If use single color LED, pow er LED w ill turn off. If use dual color LED, pow er LED w ill turn to another color. GA-8SIMLH-P(-C) Motherboard - 44 - English PnP/PCI Configurations CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are PnP/PCI Configurations PCI 1 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment [Auto] [Auto] [Auto] Item Help Menu Lev el u higf: Mov e Enter:Select +/-/PU/PD:Value F10:Sav e F6:Fail-Safe Defaults ESC:Ex it F1:General Help F5:Prev ious Values F7:Optimized Defaults Figure 6: PnP/PCI Configurations C PCI 1 IRQ Assignment 8Auto 83, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 1. (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 1. C PCI 2 IRQ Assignment 8Auto 83, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 2. (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 2. C PCI 3 IRQ Assignment 8Auto 83, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 3. (Default v alue) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 3. - 45 - BIOS Setup English PC Health Status CMOS Setup Utility -Copy right (C) 1984-2003 Aw ard Softw are PC Health Status Reset Case Open Status Case Opened VCORE +3. 3V +5V +12V Current Sy stem Temperature Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN Speed CPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN Fail Warning higf: Mov e [Disabled] No 1. 71V 3. 29V 4. 99V 11. 73V 27°C/ 80°F 25°C/ 77°F 4821 RPM 0 RPM [Disabled] [Disabled] [Disabled] ESC:Ex it F1:General Help Enter:Select +/-/PU/PD:Value F10:Sav e Figure 7: PC Health Status Item Help Menu Lev el u F5:Prev ious Values F6:Fail-Safe Defaults F7:Optimized Defaults CReset Case Open Status CCase Opened If the case is closed, "Case Opened" w ill show "No". If the case hav e been opened, "Case Opened" w ill show "Yes". If y ou w ant to reset "C ase Opened" v alue, set "Res et Case Open Status" to "Enabled" and sav e CMOS, y our computer w ill res tart. C Current Voltage (V) VCORE / +3. 3V / +5 V / +12V 8Detect sy stem' v oltage status automatically . s C Current System/CPU Temperature 8Detect Sy stem/CPU Temp. automatically. C Current CPU/SYSTEM FAN Speed (RPM) 8Detect CPU/SYSTEM Fan speed status automatically . GA-8SIMLH-P(-C) Motherboard - 46 - C CPU Warning Temperature 860°C / 140°F 870°C / 158°F 880°C / 176°F 890°C / 194°F 8Disabled Monitor CPU Temp. [. . . ] Controller Power-On Self Test Peripheral Component Interconnect Rambus in-line Memory Module Special Circumstance Instructions Single Edge Contact Cartridge Static Random Access Memory GA-8SIMLH-P(-C) Motherboard - 86 - Technical Support/RMA Sheet Customer/Country: Contact Person: Model name/Lot Number: BIOS version: Hardware Configuration CPU Memory Brand Video Card Audio Card HDD CD-ROM / DVD-ROM Modem Network AMR / CNR Keyboard Mouse Power supply Other Device Mfs. O. S. /A. S. : Model name Size: Driver/Utility: Company: E-mail Add. : PCB revision: Phone No. : English & & Problem Description: - 87 - Appendix English Troubleshooting If you encounter any trouble during boot up, please follow the troubleshooting procedures . START Turn off the power and unplug the AC power cable, then remove all of the add-on cards and cables from motherboard. Please make sure motherboard & chassis are not short ? Yes Please isolate the short pin. No Please make sure all jumper settings (such as CPU system bus speed, frequency ratio, voltage and etc. ) are set properly. No Make sure the jumper setting are correct. Yes Failure has been excluded. No Plug the CPU cooling fan power in the CPU fan connector. [. . . ]