User manual GIGABYTE GA-8ST-L

[. . . ] The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. Third-party brands and names are the property of their respective owners. Please do not remove any labels on motherboard, this may void the warranty of this motherboard. Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G. B. T. [. . . ] Using Parallel port as ECP & EPP mode. ECP Mode UseDMA This feature allows you to select Direct Memory Access(DMA) channel if the ECP mode selected. 1 3 Set ECP Mode Use DMA to 1. (Default Value) Game Port Address This feature allows you to select the game port address or disable it. Disabled 201 209 Disable this function. (Default Value) Set Game port address to 209. Midi Port Address This feature allows you to select the Midi port address or disable it. Disabled 300 330 Disable this function. Set Midi port address to 330. (Default Value) Midi Port IRQ 5 10 Set Midi Port IRQ to 5. (Default Value) GA-8ST Series Motherboard - 36 - English Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2002 Award Software Power Management Setup ACPI Suspend Type Soft-Off by PWR_BTTN System After AC Back IRQ [3-7, 9-15], NMI ModemRingOn/WakeOnLan PME Event Wake Up Power On by Keyboard Power On by Mouse Resume by Alarm x Month Alarm x Day (of Month) x Time (hh:mm:ss) Power LED in S1 state "#$%: Move F5:Previous Values [S1(POS)] [Off] [Off] [Enabled] [Enabled] [Enabled] [Password] [Disabled] [Disabled] NA 0 0:0:0 [Blinking] ESC:Exit F1:General Help F6:Fail-Safe Defaults F7:Optimized Defaults Enter:Select +/-/PU/PD:Value F10:Save [S3] Set suspend type to Suspend to RAM under ACPI OS Item Help Menu Level & [S1] Set suspend type to Power On Suspend under ACPI OS Figure 5: Power Management Setup ACPI Suspend Type S1(POS) S3(STR) Set ACPI suspend type to S1. (Default Value) Set ACPI suspend type to S3. Soft-off by PWR_BTTN Off Suspend User can press Power button to power off system instantly. (Default Value) User can press Power button for 4 seconds to power off system. System will enter suspend mode if button is pressed less than 4 seconds. - 37 - BIOS Setup English System after AC Back Off On Laststate When AC-power back to the system, the system will be in "Off" state. (Default Value) When AC-power back to the system, the system will be in "On" state. When AC-power back to the system, the system will return to the Last state before AC-power off. IRQ [3-7, 9-15], NMI When IRQ[3-7, 9-15] or NMI triggered, the suspend timer will be reloaded to prevent system gets into green mode. Disabled Enabled Disable monitor IRQ[3-7, 9-15] or NMI. (Default value) ModemRingOn/WakeOnLAN An incoming call via modem can awake the system from any suspend state or an input signal comes from the other client server on the LAN can awake the system from any suspend state. Disabled Enabled Disable Modem Ring on/wake on Lan function. (Default Value) PME Event Wake Up Set PME as wake up event. Disabled Enabled Disable PME Event wake up function. (Default Value) Enable PME Event wake up. Power On by Keyboard Password Input password (from 1 to 8 characters) and press Enter to set the Keyboard Power On Password. (Default Value) Power On by Mouse Disabled Enabled Disable this function. (Default Value) Enable Power On by move or click mouse function. GA-8ST Series Motherboard - 38 - Resume by Alarm You can set "Resume by Alarm" item to enabled and key in Data/time to power on system. (Default Value) Enable alarm function to POWER ON system. English If RTC Alarm Lead To Power On is Enabled. Month Alarm : Day (of Month) : Time (hh : mm : ss) : NA, 1~12 1~31 (0~23) : (0~59) : (0~59) Power LED in S1 state Blinking Dual/OFF In standby mode(S1), power LED will blink. If use single color LED, power LED will turn off. If use dual color LED, power LED will turn to another color. - 39 - BIOS Setup English PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2002 Award Software PnP/PCI Configurations PCI 4 IRQ Assignment PCI 1/5 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment [Auto] [Auto] [Auto] [Auto] Device(s) using this INT: Display Cntrlr -BUS 1 Dev 0 Func 0 "#$%: Move Enter:Select +/-/PU/PD:Value F10:Save F6:Fail-Safe Defaults ESC:Exit F1:General Help Item Help Menu Level & F5:Previous Values F7:Optimized Defaults Figure 6: PnP/PCI Configurations PCI 4 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 4. [. . . ] All Rights Reserved STANDARD CMOS SETUP BIOS FEATURES SETUP CHIPSET FEATURES SETUP POWER MANAGEMENT SETUP INTEGRATED PERIPHERALS HARDWARE MONITOR & MISC SETUP SUPERVISOR PASSWORD USER PASSWORD Save to CMOS and EXIT HDD AUTO DETECTION PNP / PCI CONFIGURATION IDE (Y/N)?Y LOAD BIOS DEFAULTS LOAD SETUP DEFAULTS ESC: Quit hifg : Select Item SAVE & EXIT SETUP EXIT WITHOUT SAVING (Shift)F2 : Change Color F5: Old Values F6: Load BIOS Defaults F7: Load Setup Defaults F10:Save & Exit Save Data to CMOS & Exit SETUP (4) Congratulate you have accomplished the BIOS flash procedure. GA-8ST Series Motherboard - 80 - English Method 2: If your OS is Win9X, we recommend that you used Gigabyte @BIOSTM Program to flash BIOS. Press "Tools" icon. 1. Click "@BIOS Writer Ver. 1. 08q". (2) Click "!". Click here. (3) (4) Methods and steps: I. [. . . ]