User manual GIGABYTE GA-970-GAMING SLI

[. . . ] The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. „„ For quick set-up of the product, read the Quick Installation Guide included with the product. [. . . ] When using a non-XMP memory module or Extreme Memory Profile (X. M. P. ) is set to Disabled, the value is displayed according to your memory specification. When Extreme Memory Profile (X. M. P. ) is set to Profile1 or Profile2, the value is displayed according to the SPD data on the XMP memory. The value displayed here is dependent on the CPU being used. && Profile DDR Voltage && Profile VTT Voltage && Channel Interleaving Enables or disables memory channel interleaving. Enabled allows the system to simultaneously access different channels of the memory to increase memory performance and stability. Auto lets the BIOS automatically configure this setting. (Default: Auto) (Note 1) This item is present only when you install a CPU that supports this feature. (Note 2) This item is present only when you install a memory module that supports this feature. - 22 - && Rank Interleaving Enables or disables memory rank interleaving. Enabled allows the system to simultaneously access different ranks of the memory to increase memory performance and stability. Auto lets the BIOS automatically configure this setting. (Default: Auto) `` Channel A/B Timing Settings This sub-menu provides memory timing settings for each channel of memory. Options are: 0. 75 PWM value /oC ~ 2. 50 PWM value /oC. - 23 - && 1st System Fan Speed Control (SYS_FAN1 Connector) && Slope PWM Allows you to determine whether to enable the fan speed control function and adjust the fan speed. Normal   Allows the fan to run at different speeds according to the system temperature. You can adjust the fan speed with System Information Viewer based on your system requirements. (Default) Silent  Allows the fan to run at slow speeds. Manual  Allows you to control the fan speed under the Slope PWM item. Disabled  Allows the fan to run at full speeds. Allows you to control the system fan speed. This item is configurable only when 1st System Fan Speed Control is set to Manual. Options are: 0. 75 PWM value /oC ~ 2. 50 PWM value /oC. 2-3 System Information This section provides information on your motherboard model and BIOS version. You can also select the default language used by the BIOS and manually set the system time. && System Language && System Date Selects the default language used by the BIOS. && System Time Sets the system date. [. . . ] We believe that the information contained herein was accurate in all respects at the time of printing. GIGABYTE cannot, however, assume any responsibility for errors or omissions in this text. Also note that the information in this document is subject to change without notice and should not be construed as a commitment by GIGABYTE. Our Commitment to Preserving the Environment In addition to high-efficiency performance, all GIGABYTE motherboards fulfill European Union regulations for RoHS (Restriction of Certain Hazardous Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical and Electronic Equipment) environmental directives, as well as most major worldwide safety requirements. To prevent releases of harmful substances into the environment and to maximize the use of our natural resources, GIGABYTE provides the following information on how you can responsibly recycle or reuse most of the materials in your "end of life" product. Restriction of Hazardous Substances (RoHS) Directive Statement GIGABYTE products have not intended to add and safe from hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). [. . . ]