User manual GIGABYTE GA-H61M-DS2

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GIGABYTE GA-H61M-DS2. We hope that this GIGABYTE GA-H61M-DS2 user guide will be useful to you.

Lastmanuals help download the user guide GIGABYTE GA-H61M-DS2.


Mode d'emploi GIGABYTE GA-H61M-DS2
Download

You may also download the following manuals related to this product:

   GIGABYTE GA-H61M-DS2 (14657 ko)
   GIGABYTE GA-H61M-DS2 (9983 ko)
   GIGABYTE GA-H61M-DS2 (14618 ko)
   GIGABYTE GA-H61M-DS2 (10286 ko)
   GIGABYTE GA-H61M-DS2 ANNEXE 5 (10748 ko)

Manual abstract: user guide GIGABYTE GA-H61M-DS2

Detailed instructions for use are in the User's Guide.

[. . . ] The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. [. . . ] When the CPU power consumption exceeds the specified power limit, the CPU will automatically reduce the core frequency in order to reduce the power. Auto sets the power limit according to the CPU specifications. (Default: Auto) Allows you to set a current limit for CPU Turbo mode. When the CPU current exceeds the specified current limit, the CPU will automatically reduce the core frequency in order to reduce the current. Auto sets the current limit according to the CPU specifications. (Default: Auto) Core Current Limit (Amps) CPU Cores Enabled (Note) CPU Multi-Threading (Note) Allows you to determine whether to enable all CPU cores. Allows you to determine whether to enable multi-threading technology when using an Intel CPU that supports this function. This feature only works for operating systems that support multi-processor mode. (Default: Enabled) Enables or disables Intel CPU Enhanced Halt (C1E) function , a CPU power-saving function in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. Auto lets the BIOS automatically configure this setting. (Default: Auto) Allows you to determine whether to let the CPU enter C3/C6 mode in system halt state. When enabled, the CPU core frequency and voltage will be reduced during system halt state to decrease power consumption. The C3/C6 state is a more enhanced power-saving state than C1. Auto lets the BIOS automatically configure this setting. (Default: Auto) Enables or disables Intel CPU Thermal Monitor function , a CPU overheating protection function. When enabled, the CPU core frequency and voltage will be reduced when the CPU is overheated. Auto lets the BIOS automatically configure this setting. (Default: Auto) Enables or disables Enhanced Intel SpeedStep Technology (EIST). Depending on CPU loading, Intel EIST technology can dynamically and effectively lower the CPU voltage and core frequency to decrease average power consumption and heat production. Auto lets the BIOS automatically configure this setting. (Default: Auto) CPU Enhanced Halt (C1E) (Note) C3/C6 State Support (Note) CPU Thermal Monitor (Note) CPU EIST Function (Note) (Note)  This item is present only when you install a CPU that supports this feature. [. . . ] You will be requested to confirm the password. Type the password again and press <Enter>. The BIOS Setup program allows you to specify two separate passwords: Supervisor Password When a system password is set and the Password Check item in Advanced BIOS Features is set to Setup, you must enter the supervisor password for entering BIOS Setup and making BIOS changes. When the Password Check item is set to System, you must enter the supervisor password (or user password) at system startup and when entering BIOS Setup. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGABYTE GA-H61M-DS2

Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets...
In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.

Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGABYTE GA-H61M-DS2 will begin.

Search for a user manual

 

Copyright © 2015 - LastManuals - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.

flag