User manual GIGABYTE GA-M55SLI-S4

[. . . ] GA-M55SLI-S4 AMD Socket AM2 Processor Motherboard User's Manual Rev. 2002 12ME-M55SLIS4-2002R * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!* The WEEE marking applies only in European Union's member states. Motherboard GA-M55SLI-S4 (rev. 1. 0) Motherboard GA-M55SLI-S4 (rev. [. . . ] (Default value) 1 Set ECP Mode Use DMA to 1. On-Chip USB Disabled V1. 1+V2. 0 V1. 1 Enabled Disabled Enabled Disabled Disable this function if you are not using onboard USB function. (Default value) Enable only USB 1. 1 controller. Enable USB keyboard support in the MS-DOS environment. (Default value) Enable USB mouse support in the MS-DOS environment. (Default value) Legacy USB Keyboard/Storage Legacy (DOS) USB Mouse Legacy USB Storage detect This option allows users to decide whether to detect USB storage devices, including USB flash drives and USB hard drives during POST. Enabled BIOS will scan all USB storage devices. (Default value) Disabled Disable this function. - 45 - BIOS Setup English 2-4 Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2006 Award Software Power Management Setup [S1(POS)] [Instant-off] [Enabled] [Enabled] [Disabled] [Disabled] Everyday 0:0:0 [Disabled] [Disabled] Enter [Soft-Off] Item Help Menu Level ACPI Suspend Type Soft-Off by Power button PME Event Wake Up Modem Ring On USB Resume from Suspend Power-On by Alarm x Day of Month Alarm x Time (hh:mm:ss) Alarm Power On By Mouse Power On By Keyboard x KB Power ON Password AC BACK Function : Move Enter: Select +/-/PU/PD: Value F5: Previous Values F10: Save ESC: Exit F7: Optimized Defaults F1: General Help ACPI Suspend Type S1(POS) S3(STR) Instant-off Delay 4 Sec Set ACPI suspend type to S1/POS(Power On Suspend). (Default value) Set ACPI suspend type to S3/STR(Suspend To RAM). Press power button then Power off instantly. (Default value) Press power button 4 seconds to Power off. Enter suspend if button is pressed less than 4 seconds. Soft-Off by Power button PME Event Wake Up This feature requires an ATX power supply that provides at least 1A on the 5VSB lead. (Default value) Modem Ring On An incoming call via modem can awake the system from any suspend state. Disabled Disable Modem Ring on function. (Default value) USB Resume from Suspend Disabled Enabled Disable this function. (Default value) Enable USB device wake up system from suspend type. Power-On by Alarm You can enable this item and key in Date/Time to power on system. (Default value) Enabled Enable alarm function to POWER ON system. Day of Month Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) GA-M55SLI-S4 Motherboard - 46 - Power On By Mouse Disabled Double Click Disable this function. (Default value) Double click on PS/2 mouse left button to power on the system. English Power On By Keyboard Disabled Disable this function. (Default value) Password Enter from 1 to 5 characters to set the Keyboard Power On Password. Keyboard 98 If your keyboard have "POWER Key" button, you can press the key to power on the system. KB Power ON Password When "Power On by Keyboard" set at Password, you can set the password here. Enter Input password (from 1 to 5 characters) and press Enter to set the Keyboard Power On password. AC BACK Function Soft-Off Full-On When AC-power back to the system, the system will be in "Off" state. (Default value) When AC-power back to the system, the system always in "On" state. - 47 - BIOS Setup English 2-5 PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2005 Award Software PnP/PCI Configurations PCI 2 IRQ Assignment PCI 1 IRQ Assignment [Auto] [Auto] Item Help Menu Level : Move Enter: Select +/-/PU/PD: Value F5: Previous Values F10: Save ESC: Exit F7: Optimized Defaults F1: General Help PCI 2 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 2. [. . . ] Question 5: Sometimes I hear different continuous beeps from computer after system boots up. Answer: The beep codes below may help you identify the possible computer problems. However, they are only for reference purposes. The situations might differ from case to case. [. . . ]