User manual GIGABYTE GA-M750SLI-DS4

[. . . ] GA-M750SLI-DS4 AM2+/AM2 socket motherboard for AMD PhenomTM FX processor/AMD PhenomTM X4 processor/ AMD PhenomTM X3 processor/AMD AthlonTM X2 processor/ AMD AthlonTM processor/AMD SempronTM X2 processor AMD SempronTM processor User's Manual Rev. 1002 12ME-M75SLID4-1002R Motherboard GA-M750SLI-DS4 Motherboard GA-M750SLI-DS4 May 15, 2008 May 15, 2008 Copyright © 2008 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. The logo is exclusively licensed to GIGABYTE UNITED INC. [. . . ] (Default: Enable) Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card, or the onboard VGA. PCI Slot Sets the PCI graphics card as the first display. Onboard VGA Sets the onboard VGA as the first display. (Default) PEG Sets the PCI Express graphics card on the PCIEX16_1 slot as the first display. PEG (Slot2) Sets the PCI Express graphics card on the PCIEX8_1 slot as the first display. iGPU Frame Buffer Control Determines whether to manually set the Frame Buffer Size. Auto lets BIOS automatically set the Frame Buffer Size as required. Manual allows the Frame Buffer Size item below to be configurable. (Default: Auto) Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. This item is configurable only if the iGPU Frame Buffer Control option is set to Manual. Options are: 128M (default), 256M, 512M, Disabled. (Note 2) This item appears only if you install a graphics card that supports this feature. GA-M750SLI-D4 Motherboard - 46 - Onboard GPU Enables or disables the onboard VGA function. Enable If No Ext PEG Activates the onboard VGA only if no PCI Express VGA card is installed. (Default) Always Enable Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to set up a dual view configuration, set this item to Always Enable. - 47 - BIOS Setup 2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2008 Award Software Integrated Peripherals [Enabled] [Enabled] [IDE] [Auto] [Auto] [Auto] [Auto] [Press Enter] [Disabled] [3F8/IRQ4] [378/IRQ7] [SPP] 3 [V1. 1+V2. 0] [SHADOW] [Disabled] [Disabled] [Enabled] +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save Item Help Menu Level On-Chip IDE Channel NV SATA Controller Onchip SATA Mode Onboard Audio Function HDMI Audio On-Chip MAC Lan Onboard 1394 SMART LAN Onboard LAN Boot ROM Onboard Serial Port 1 Onboard Parallel Port Parallel Port Mode x ECP Mode Use DMA On-Chip USB USB Memory Type USB Keyboard Support USB Mouse Support Legacy USB storage detect : Move Enter: Select F5: Previous Values ESC: Exit F1: General Help F7: Optimized Defaults On-Chip IDE Channel Enables or disables the integrated IDE controller. (Default: Enabled) NV SATA Controller Enables or disables the integrated SATA controller. (Default: Enabled) OnChip SATA Mode Configures the operating mode of the integrated SATA controller. IDE Configures the SATA controller to IDE mode. (Default) (Only for SATA2_0~3 connectors) RAID Enables RAID for the SATA controller. AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. Onboard Audio Function Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. HDMI Audio Enables or disables the chipse integrated HDMI audio function. [. . . ] For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling. When your electrical or electronic equipment is no longer useful to you, "take it back" to your local or regional waste collection administration for recycling. If you need further assistance in recycling, reusing in your "end of life" product, you may contact us at the Customer Care number listed in your product's user's manual and we will be glad to help you with your effort. - 97 Appendix Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. [. . . ]