User manual GIGABYTE GA-MA69VM-S2

[. . . ] GA-MA69VM-S2 AMD AthlonTM 64 FX / AthlonTM 64 X2 Dual-Core / AMD AthlonTM 64 / SempronTM AM2 Processor Motherboard User's Manual Rev. 1002 12ME-MA69VMS2-1002R * The WEEE marking on the product indicates this product must not be disposed of with user's other household waste and must be handed over to a designated collection point for the recycling of waste electrical and electronic equipment!!* The WEEE marking applies only in European Union's member states. Motherboard GA-MA69VM-S2 Motherboard GA-MA69VM-S2 Mar. 12, 2007 Copyright © 2007 GIGA-BYTE TECHNOLOGY CO. , LTD. [. . . ] (Default value) Using Parallel port as Enhanced Parallel Port. Using Parallel port as Extended Capabilities Port. Using Parallel port as ECP and EPP mode. Parallel Port Mode ECP Mode Use DMA This option is available only when Parallel Port Mode is set to ECP or ECP+EPP. (Default value) 1 Set ECP Mode Use DMA to 1. GA-MA69VM-S2 Motherboard - 38 - 2-4 Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2007 Award Software Power Management Setup [S1(POS)] [Instant-off] [Disabled] [Disabled] [Disabled] [Disabled] Enter [Soft-Off] [Disabled] Everyday 0:0:0 Item Help Menu Level English ACPI Suspend Type Soft-Off by Power button Modem Ring Resume PME Event Wake UP Power On By Mouse Power On By Keyboard x KB Power ON Password AC BACK Function Power-On by Alarm x Date (of Month) x Resume Time (hh:mm:ss) : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults ACPI Suspend Type S1(POS) S3(STR) Instant-off Delay 4 Sec Set ACPI suspend type to S1/POS(Power On Suspend). (Default value) Set ACPI suspend type to S3/STR(Suspend To RAM). Press power button then Power off instantly. (Default value) Press power button 4 seconds to Power off. Enter suspend if button is pressed less than 4 seconds. Soft-Off by Power button Modem Ring Resume An incoming call via modem can awake the system from any suspend state. Disabled Disable Modem Ring on function. (Default value) Enabled Enable Modem Ring on function. PME Event Wake Up This feature requires an ATX power supply that provides at least 1A on the 5VSB lead. (Default value) Power On By Mouse Disabled Enabled Disabled this function. (Default value) Double click on PS/2 mouse left button to power on the system. Power On By Keyboard Password Enter from 1 to 5 characters to set the Keyboard Power On Password. (Default value) Keyboard 98 If your keyboard have "POWER Key" button, you can press the key to power on the system. - 39 - BIOS Setup English KB Power ON Password When "Power On by Keyboard" set at Password, you can set the password here. Enter Input password (from 1 to 5 characters) and press Enter to set the Keyboard Power On password. AC BACK Function Soft-Off Full-On When AC-power back to the system, the system will be in "Off" state. (Default value) When AC-power back to the system, the system always in "On" state. Power-On by Alarm You can set "Power-On by Alarm" item to enabled and key in Date/Time to power on system. (Default value) Enabled Enable alarm function to POWER ON system. Day of Month Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) GA-MA69VM-S2 Motherboard - 40 - 2-5 PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2007 Award Software PnP/PCI Configurations PCI 1 IRQ Assignment PCI 2 IRQ Assignment [Auto] [Auto] Item Help Menu Level English : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults PCI 1 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 Auto assign IRQ to PCI 1. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 1. (Default value) Set IRQ 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 to PCI 2. PCI 2 IRQ Assignment Auto 3, 4, 5, 7, 9, 10, 11, 12, 14, 15 - 41 - BIOS Setup English 2-6 PC Health Status CMOS Setup Utility-Copyright (C) 1984-2007 Award Software PC Health Status Reset Case Open Status Case Opened Vcore DDR18V +3. 3V +12V Current System Temperature Current CPU Temperature Current CPU FAN Speed Current System FAN Speed System Warning Temperature CPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN Fail Warning CPU Smart FAN Control CPU Smart FAN Mode [Disabled] NO OK OK OK OK 39 oC 49 oC 3183 RPM 0 RPM [Disabled] [Disabled] [Disabled] [Disabled] [Enabled] [Auto] Item Help Menu Level : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F6: Fail-Safe Defaults F10: Save ESC: Exit F1: General Help F7: Optimized Defaults Reset Case Open Status Disabled Enabled Don't reset case open status. (Default value) Clear case open status at next boot. Case Opened If the case is closed, Case Opened will show "No. " If the case is opened, Case Opened will show "Yes. " If you want to reset Case Opened value, enable Reset Case Open Status and save the change to CMOS, and then your computer will restart. Current Voltage(V) VCORE / DDR18V / +3. 3V / +12V Detect system's voltage status automatically. Current System/CPU Temperature Detect system/CPU temperature automatically. Current System/CPU FAN Speed (RPM) Detect system/CPU fan speed status automatically. System/CPU Warning Temperature 60 o C / 140 o F 70 o C / 158 o F 80 o C / 176 o F 90 o C / 194 o F Disabled Disabled Enabled Monitor system/CPU temperature at Monitor system/CPU temperature at Monitor system/CPU temperature at Monitor system/CPU temperature at Disable this function. (Default value) 60 oC 70 oC 80 oC 90 oC / / / / 140 o F. 194 o F. CPU/SYSEM FAN Fail Warning Fan Fail warning function disable. [. . . ] Question 5: Sometimes I hear different continuous beeps from computer after system boots up. Answer: The beep codes below may help you identify the possible computer problems. However, they are only for reference purposes. The situations might differ from case to case. [. . . ]