User manual GIGABYTE GS-R12P8G

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Chapter 1 Features Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Chapter 2 System Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Chapter 3 System Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Step 5 Reverse step 1, 2, 3 and 4 to complete the HDD installtion. Step 1 Step 2 Remove Step 3 Step 4 16 Hardware Installation Process Step 3-7: FAN Duct Removal and Installation Step 1 Pull up the screw-holder and lossen the thumbscrews. Step 2 For FAN Duct Installation, place the fan duct on the top of heat sinks. Fasten the screws to the locked position and push down the screw-holders. Step 1 Step 2 17 GS-R12P8G Rack Mount Server Chapter 4 Appearance of GS-R12P8G 4-1: Front View of GS-R12P8G Slim Type CD-ROM Slim Floopy USB Connector LE D s RJ45 (For Console Redirection) 18 System Appearance 4-2: Rear View of GS-R12P8G Po we r VGA Po rt COM Po rt Lo w Pro file Rise r Slo t Full-size /Full-le ng th Rise r Slo t Ke yb o ard Co nne cto r Mo use Co nne cto r USB Co nne cto rs LAN 1 & 2 Po rts 19 GS-R12P8G Rack Mount Server 4-3: Switch and LED Indicators Introduction Status HDD Fail Warning HDD Power/Sleep ID Name Power Color Green Green -Status Green Amber Amber Condition On Blink Off On Blink On NMI LAN1/2 Activities Description Power On Sleep (S1) Power Off (S4/S5) System Ready On/ Alarm System Ready but deqraded, CPU Failed, DIMM Killed. Critical Alarm: Critical Power Module Failure, Critical FANs Failure, Voltage (Power Supply) Critical Temperature and Voltage -HDD Green Amber -Green Green -Green Green -Blue -- Off Blink On Off On Blink Off On Blink Off Blink Off 20 System Not Ready/ Post error/NMI event/CPU or terminator missing Hard Disk Drive Access HDD Fault No Access and No HDD Fault LAN Link / No access LAN access Idle LAN Link / No access LAN access Idle Unit selected for identification No identification LAN1 Activity LAN2 Activity Identification LED Description 4-4: LAN LED Description Name LAN Color Green - Condition ON BLINK OFF ON BLINK ON BLINK OFF Description LAN Link / no Access LAN Access Idle 1Gbps connection Port identification with 1Gbps connection 100Mbps connection Port identification with 10 or 100Mbps connection 10Mbps connection Link/Activity Green GbE LAN Yellow Speed Yellow Green Green - 21 GS-R12P8G Rack Mount Server 4-5 : Connector Icon Description Suggest Icon Description Keyboard VGA Mouse LA N Parallel Port Serial Port USB 22 Motherboard Layout Chapter 5 Motherboard Layout & Jumper Setting 5-1: GA-4MPSV Motherboard Layout I N O P Q R G I W C E U X D F H JK Z L M N O P Q R S T U V W X Y Z 23 S T B V A Y A B C D E F G H I J K L M CPU LGA775 Intel® Mukilteo ATI RN50 IntelICH7R Intel 6702 PXH-V BIOS ITE IT8712F IPMI Connector Intel 82573V GbE SATA1 SATA2 SATA3 SATA4 IPMB2 IPMB1 WOL WOR COM2 DDR2A1 DDR2B1 DDR2A2 DDR2B2 PCIE_RISER PCI-X_1 ATX1 ATX2 GS-R12P8G Rack Mount Server 5-2: Jumper Setting CLR_CMOS ( (Clear CMOS Function) You may clear the CMOS data to its default values by this jumper. Default value doesn't include the "Shunter" to prevent from improper use this jumper. To clear CMOS, temporarily short 1-2 pin. 1 1 1-2 close: Clear CMOS 2-3 close: Normal (Default value) CLR_CMOS RECOVERY ( BIOS Recovery Function) 1 1-2 close: Enable BIOS Recovery function. 1 2-3 close: Disable this function. (Default value) Please remove the jumper when system access recovery flopp disk. 24 Jumper Setting PASSWORD (Clear CMOS Password Function) Open: Clear Password Short: Normal (Default) Please remove the jumper when system reboot next time. 25 GS-R12P8G Rack Mount Server Chapter 6 BIOS Setup BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off. ENTERINGSETUP Power ON the computer and press <F2> immediately will allow you to enter Setup. CONTROLKEYS <> <> < < > > Move to previous item Move to next item Move to the item in the left hand Move to the item in the right hand Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu - Exit current page and return to Main Menu Decrease the numeric value or make changes General help, only for Status Page Setup Menu and Option Page Setup Menu Reserved Reserved Reserved Reserved Reserved Reserved Load the Optimized Defaults Save all the CMOS changes, only for Main Menu <Esc> <+/PgUp> Increase the numeric value or make changes <-/PgDn> <F1> <F2> <F3> <F4> <F6> <F7> <F8> <F9> <F10> 26 BIOS Setup GETTINGHELP Main Menu The on-line description of the highlighted setup function is displayed at the bottom of the screen. Status Page Setup Menu / Option Page Setup Menu Press F1 to pop up a small help window that describes the appropriate keys to use and the possible selections for the highlighted item. To exit the Help Window press <Esc>. Main This setup page includes all the items in standard compatible BIOS. Advanced This setup page includes all the items of AMI special enhanced features. (ex: Auto detect fan and temperature status, automatically configure hard disk parameters. ) Security Change, set, or disable password. Disabled: The data transfer from and to the device occurs one sector at a time. Auto: The data transfer from and to the device occurs multiple sectors at a time if the device supports it. LBA Mode This field shows if the device type in the specific IDE channel support LBA Mode. Enable this function to max imize the IDE data transfer rate. This field shows the information of Teansfer Mode. This filed displays the DMA mode of the device in the specific IDE channel. 32-Bit I/O Transfer Mode Ultra DMA Mode 30 BIOS Setup Advanced Processor Options Figure 1-1: Advanced Processor Option Advanced Processor Option This category includes the information of CPU Speed, Processor ID, Processor L2 Cache. And setup menu for C1 Enhanced Mode, No Execute Mode Memory Protection, and Processor Power Management. Processor Reset Yes No Select `Yes' BIOS will clear historical processor status and reset all processors on next boot. (Default value) C1 Enhanced Mode With enabling C1 Enhanced Mode, all loical processors in the physical processor have entered the C1 state, the processor will reduce the core clock frequency to system bus ratio and VID. Enabled Disabled Enabled C1 Enhanced Mode. (Default value) 31 GS-R12P8G Rack Mount Server No Execute Mode Mem. Protection Enabled Disabled Enable No Execute Mode Memory Protection function. (Default value) Disables No Execute Mode Memory Protection function. Processor Power Management Select the Power Management desired: Enabled C States Only GV1/GV3 Only Disabled C states and GV1/GV3 are enabled. (Default value) C states and GV1/GV3 are disabled. 32 BIOS Setup Advanced About This Section: Advanced With this section, allowing user to configure your system for basic operation. [. . . ] (5) 59 GS-R12P8G Rack Mount Server B. Intel LAN Driver Installation Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver CD-title will auto start and show a series of Setup Wizard dialog boxes. If not, please double click the CD-ROM device icon in "My computer", and execute the setup. exe. The CD auto run program starts, Double click on "Intel LAN Driver" to start the installation. System starts to install the LAN Driver automatically. [. . . ]