User manual GIGABYTE GS-R22PDP

[. . . ] 8 Chapter 1 Features Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Chapter 2 System Hardware Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Step 2-1: Chassis Removal and Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Step 2-2: CPU Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Before installing the expansion card, please check the card size limitation. Size limitation for standard riser card is 182mm; and the size limitation for low profile riser card is 182mm. Step 2 Lift the riser bracket slightly, then pull it out from the server chassis. Step 3 Align the expansion card with the guiding groove. Slide the expansion card into the slot until the card firmly seats. Step 4 Align the riser bracket to the system module. 3 1 2 1 4 15 Hardware Installation Process Step 2-6: Hard Disk Drive Installation Step 1 Press the release button. Step 2 Pull the blank out of the drive bay. Step 5 Slide the blank into the bay until it locks into place. Connect cable and power. 1 2 3 4 4 16 Hardware Installation Process Step 2-7: FAN Duct Removal and Installation Step 1 Align the fan duct with the guiding groove. Push down the fan duct into system ntil the its firmly seats. Guiding groove 17 System Appearance Chapter 3 Appearance of GS-R22PDP 3-1: Front View of GS-R22PDP Hot-Swap SATA HDDs USB connectors Front panel switch and LEDs 3-2: Rear View of GS-R22PDP Power cord Mouse connector Keyboard connector COM port VGA port USB connectors RJ45 LAN ports Low-profile riser slot 18 GS-R22PDP Rack Mount Server 3-3: Switch and LED Indicators Introduction Reset Switch NMI Switch LAN1/2 Activities System LED ID BTN&LED HDD Power Name Power Color Green Green -- Condition On Blink Off Blink On Description Power On Sleep (S1) Power Off (S4) System Ready but degraded, CPU Failed, DIMM Killed Critical Alarm: Critical Power Module Failure, Critical FANs Failure, Voltage (Power Supply) Critical Teemperature and Voltage System healthy. Hard Disk Drive Access No Access and No HDD Fault LAN Link / No access LAN access Idle LAN Link / No access LAN access Idle Unti selected for identification No identification SYS (System) Amber Amber -HDD LAN1 Activity LAN2 Activity ID (Identification) Green -Green Green -Green Green -Blue -- Off Blink Off On Blink Off On Blink Off On Off 19 LED Description 3-4: LAN LED Description Name Color LAN Green Link/Activity Green 10 LAN Green Green Condition ON BLINK OFF OFF ON BLINK ON BLINK Description LAN Link / no Access LAN Access Idle 10Mbps connection 100Mbps connection Port identification with 10 or 100Mbps connection 1Gbps connection Port identification with 1Gbps connection Speed 100 LAN Speed GbE LAN Yellow Speed Yellow 20 GS-R22PDP Rack Mount Server 3-5: Connector Icon Description Suggest Icon Description Keyboard Mouse VGA COM LAN USB 21 Motherboard Layout Chapter 4 Motherboard Jumper Setting 4-1: GA-3CESL1-RH Motherboard Jumpper Setting JP1 CLR_CMOS1 22 GS-R22PDP Rack Mount Server 1. (Default setting) Disables AMD No-execute page protection feature. Enhanced Virtus Protection Power Now!Technology AMD PowerNow!TM Technology allows the processor to dissipate less heat under normal operating conditions, providing a cooler and quieter-running system. It also provides performance on demand when required by the application. Technology feature. Node Interleave Interleave memory blocks across nodes. Auto Disabled Auto Disabled Enable node interleave function. (Default setting) Enable DRAM bank interleave function. (Default setting) Enable ACPI 2. 0 static resources affinity table for ccNUMA systems. (Default setting) Disabled Unganged Ganged Auto Disabled Disable this function. Select Unganged mode as optimize performance. (Default setting) Select Ganged mode as optimize performance. DRAM Bank Interleave ACPI SRAT Table Enabled Optimize Performance DRAM ECC Scrub Control Enable DRAM ECC scrub control function. (Default setting) 30 GS-R22PDP Rack Mount Server L2 ECC Scrub Control Sets the rate of background scrubbing for the L2 cache. [. . . ] Including information of BIOS Version, System Product Name, System Serial Number, BaseBoard ID, Main Board Serial Number, System ID, BMC Firmware Version, and, FRU Revision. All items in this menu cannot be modified, display only. Clear Case Open Status Press [Enter] to clear the Case Open Status. 47 BIOS Setup Console Redirection Figure 4-2: Remote Access Configuration COM Port Adress If this option is set to enabled, it will use a port on the motherboard. On-board COM A On-board COM B Disabled Use Serial Port A as the COM port address. Use Serial Port B as the COM port address. [. . . ]