User manual GIGABYTE GV-NX72G512E2

[. . . ] GV-NX72G512E1/ GV-NX72G512E2 GeForce 7200 GS Graphics Accelerator TM User's Manual Rev. 223 12MD-NX72G5E-223R Copyright © 2009 GIGABYTE TECHNOLOGY CO. , LTD Copyright by GIGA-BYTE TECHNOLOGY CO. , LTD. No part of this manual may be reproduced or transmitted in any form without the expressed, written permission of GBT. Trademarks Third-party brands and names are the properties of their respective owners. [. . . ] If it does not show up, please run "D:\setup. exe". When the autorun window shows up, click the Install Display Driver item. Step 2. Click the Next button. The system is installing the components. Step 3. Click the Finish button to restart the computer. Then the driver installation is completed. GV-NX72G512E1/E2 Graphics Accelerator - 12 - 3. 1. 4. Utilities on Driver CD Insert the driver CD disk into your CD-ROM, and then you can see the AUTORUN window. If it does not show up, please run "D:\setup. exe". Step 1. When autorun window shows up, please click the GIGABYTE Utility item. Step 2. Click the Next button. - 13 - Software Installation Step 6. Click the Finish button to restart computer. Display Properties Pages To access Display Properties pages, right-click on desktop and then select Properties. The Display Properties dialog box shows the information of display adapter, color, the range of display area, and the refresh rate. Settings (Resolutions and Color Quality for Windows) You may adjust the screen resolution and color quality settings in this dialog box. You can move the slider to change the resolution. You can click the item to change the color quality. Click the Advanced button for advanced settings GeForce 7200 GS properties After pressing the Advanced button in Settings, you'll see Plug and Play Monitor and NVIDIA GeForce 7300 SE/7200 GS dialog box. (You can also click the Nvidia icon in the system tray and select Nvidia Display to access the GeForce 7300 SE/7200 GS properties page. ) This page shows the Adapter, System and Driver versions information. You can select other properties from the pop-out menu. - 19 Software Installation nView Display Settings properties nView allows you to connect separate displays to single graphics card. · nView Display mode: select your preferred nView display modes here. Options: Single display/ Clone/ Dual View · Primary/Secondary display: select a single display or display pair. The selected display combination will appear in the graphical representation below. · Make this the primary display: Specifies that the display corresponding to the icon you selected above is the primary display. · Click Apply to apply settings or click OK to save settings. If TV is chosen as the display, you will need to select the proper TV format. To do this, click Device Settings followed by Select TV format. [. . . ] (Please refer to the monitor's manual. ) GV-NX72G512E1/E2 Graphics Accelerator - 30 - 5. How to Reflash the BIOS in MS-DOS Mode 1. Extract the downloaded Zip file to your hard disk(s) or floppy disk. (For Windows 2000/XP, you need a startup disk to restart the computer in MS-DOS mode. ) 3. [. . . ]