User manual GIGABYTE GZ-KX9

[. . . ] No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without Gigabyte's prior written permission. Specifications and features are subject to change without prior notice. Product Manual Classification In order to assist in the use of this product, Gigabyte has categorized the user manual in the following: n For quick installation, please refer to the "Hardware Installation Guide" included with the product. n For detailed product information and specifications, please carefully read the "Product User Manual". n For detailed information related to Gigabyte's unique features, please go to "Technology Guide" section on Gigabyte's website to read or download the information you need. [. . . ] for automatic sy stem restart or clear the CMOS setup data and perform a safe restart. Disabled Disable CPU Host Clock Control. (Default v alue) Enabled Enable CPU Host Clock Control. CPU Host Frequency (Mhz) This item w ill be av ailable w hen "CPU Host Clock Control" is set to Enabled. 100MHz ~ 355MHz Set CPU Host Clock from 100MHz to 355MHz. If y ou use FSB800 Pentium 4 processor, please set "CPU Host Frequency " to 200MHz. Incorrect using it may cause y our sy stem broken. For pow er End-User use only ! Memory Frequency For Wrong frequency may make sy stem can't boot, c lear CMOS to ov ercome w rong frequency issue. for FSB(Front Side Bus) frequency =533MHz, 2. 5 Memory Frequency = Hos t clock x 2. 5. Auto Set M emory frequency by DRAM SPD data. (Default v alue) for FSB(Front Side Bus) frequency =800MHz, 1. 66 Memory Frequency = Hos t clock X 1. 66 2. 0 Memory Frequency = Hos t clock X 2. 0. 2. 66 Memory Frequency = Host clock X 2. 66. A message "PASSWORD DISABLED" w ill appear to confirm the passw ord being dis abled. Once the passw ord is disabled, the sy stem w ill boot and you can enter Setup freely . The BIOS Setup program allow s y ou to specify tw o separate passwords: SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, any one may access all BIOS Setup program function. When enabled, the Superv is or passw ord is required for entering the BIOS Setup program and having full configuration fields, the User passw ord is required to access only basic items. If y ou select "Sy stem" at "Password Check" in Adv ance BIOS Features Menu, y ou w ill be prompted for the passw ord ev ery time the system is rebooted or any time y ou try to enter Setup Menu. If you select "Setup" at "Password Check" in Adv ance BIOS Features Menu, y ou w ill be prompted only w hen y ou try to enter Setup. GA-8I915G Pro Motherboard - 46 - 2-11 Save & Exit Setup CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software } } } } } } } Stan dard CM OS Features Load Fail-Safe Defaults Advanc ed BIOS Fe atures Load Optimized Defaults IntegratedPeripherals Set Su pervisor Pa ssword Power Manag ement Setup Set User Password PnP/PCI Configur ations Save & Exit Setup Save to CMOS an d EXITExit Without Saving (Y/N)?Y PC H ealth Status MB In telligent Tweaker(M. I. T. ) higf: Selec t Item F10: Save & Exit Setup Save & Exit Setup English ESC: Qu it F8: Q- Flash Ty pe "Y" w ill quit the Setup Utility and sav e the user setup v alue to RTC CMOS. Ty pe "N" will return to Setup Utility. 2-12 Exit Without Saving CMOS Setup Utility -Cop y right (C) 198 4-2004 Award Software } } } } } } } Stan dard CM OS Features Advanc ed BIOS Fe atures IntegratedPeripherals Power Manag ement Setup PnP/PCI Configur ations PC H ealth Status MB In telligent Tweaker(M. I. T. ) Load Fail-Safe Defaults Load Optimized Defaults Set Su pervisor Pa ssword Set User Password Quit Without Saving (Y/N)?& Exit Setup Save N Exit Without Saving higf: Selec t Item F10: Save & Exit Setup Abandon all Data ESC: Qu it F8: Q- Flash Ty pe "Y" w ill quit the Setup Utility w ithout sav ing to RTC CMOS. [. . . ] Support : http://tw. giga-byte. com/TechSupport/ServiceCenter. htm Non-Tech. Support(Sales/Marketing) : http://ggts. gigabyte. com. tw/nontech. asp WEB address (English): http://www. gigabyte. com. tw WEB address (Chinese): http://chinese. giga-byte. com -- U. S. A. Address: 17358 Railroad St, City of Industry, CA 91748. TEL: +1 (626) 854-9338 FAX: +1 (626) 854-9339 Tech. [. . . ]