User manual GIGABYTE GZ-X4

[. . . ] Components Introduction 1-1 Casing's Internal Structure 1-2 Casing's Panel Structure 1-3 Removal of Side and Front Panels 2. Installation Instructions 4-1 Installation of Power Supply 4-2 Installation of Motherboard 4-3 Installation of Add-On card 4-4 Installation of Top Multi-Media I/O Ports 4-5 Connection of Fan Power Cable 4-6 Installation of 5. 25" Front Drive Bay 4-7 Installation of 3. 5" Front Device Bay 4-8 Installation of 3. 5" Internal Device Bay 4-9 Installation of 2. 5" Enclosure 4-10 Application of DIY inter-changeable LED lighting 4-11 Application of Security locks 4-12 Application of Foot Support 4-13 Application of Liquid Cooling System 4-14 Recommended GIGABYTE Thermal Solution products 4 4 5 6 6 7 8 8 8 8 9 10 10 10 10 11 11 11 11 11 12 English 03 1. Components Introduction 1-1 Casing's Internal Structure Power Supply Bay 5. 25" Front Device Bay Dual Rear fans Motherboard tray and PCI Slot panel 3. 5" Front Device Bay PCI Tool-Free Fastener 3. 5" Internal Device Bay Piping Outlets Front intake Fan Accessory Box Foot Support Accessory Box (Refer to the figures below for the attachments in the accessory box) Copper Stand Off x 9 Motherboard Securing Screw x 9 Power Supply Securing screw x 4 Securing Runner x10 Blue Led 2. 5" HDD mobile enclosure protective carry bag USB Y Cable Wire Clamp x 2 Key 04 English Front Cable Kit (Refer to the figures below for the cable connectors) eSATA USB 2. 0 Audio (HD & AC'97) IEEE1394 (Multi-connectors) Fan 3-Pin Connector Power LED 4-pin Connector Power SW / Reset SW / HDD LED / Speaker Connector 1-2 Casing's Panel Structure a) Front Panel / Left Side Panel Red Led Disc Storage 2. 5" enclosure docking Latch / Security Lock Transparent side panel Ventilated mesh side panel b) Top Panel Power Switch Multi-Media I/O port English 05 1-3 Removal of Side and Front Panels 1-3. 1 To remove side panels: 1-3. 1a. Remove the 4 thumb screws at the rear of the side panel, and detach the side panels. 1-3. 2 To remove front panel: 1-3. 2a Remove the left and right side panels (see step 1-3. 1 on page 5), release the 4 clamps that hold the front panel onto the chassis. 2. [. . . ] Remove the 4 thumb screws at the rear of the side panel, and detach the side panels. 1-3. 2 To remove front panel: 1-3. 2a Remove the left and right side panels (see step 1-3. 1 on page 5), release the 4 clamps that hold the front panel onto the chassis. 2. Features - High Quality Design GIGABYTE top-class Full tower thermal solution casing. Aluminum 3D front panel design with hair-line brush anodized finishing. Illuminated and atmospherically-soothing backlight for a post-modern classy impression. - Complete I/O Support Complete Top panel multi-media support, includes 1 x eSATA, 2 x USB 2. 0, 1 x IEEE1394, 1 x Audio Set (HD & AC'97). thermal solution LCS and Air cooling products lines. Supports CEB / ATX / Micro ATX motherboards. - Integration of Cooling Technology Industry leading dual rear 12cm silent blue LED fan, Large air volume with low noise. Unique ventilated mesh / transparent side panel design. - Convenience of assembly Scratch-resistant processing that ensures safety during assembly. Detachable tool enclosure for storing tools, screws and cables. Side panel with one-hand-operation, for easy disassembly. 06 English 3. Specifications Model Case Type Dimensions Front bezel material Color Side panel Body material Net weight 5. 25" drive bay (External) 3. 5" drive bay (External) 3. 5" drive bay (Internal) Expansion slots Form factor System Fan (front) System Fan (rear) I / O ports GZ-FAEA41-CJB FULL TOWER 205 x 522 x 500 (W x H x D) Aluminum Black Vent / Transparent SECC (0. 8mm) 11. 3 KG 4 1 5 7 CEB / ATX / Micro ATX 1 x 12cm silent fan 2 x 12cm blue LED illuminated silent fan 1 x eSATA / 2 x USB 2. 0 / 1 x IEEE1394 / 1 x Audio Set (AC'97/HD) English 07 4. 4-6-2 Slide-in the 5. 25" device through the front panel to align it with the front panel bezels. 4-6-3 Secure the 5. 25" device with the internal latch. Refer to the figure for installation procedure. 4-6-4 Installation complete. 4-6. 1 4-6. 2 4-6. 3 LOCK 4-6. 4 4-7 Installation of 3. 5" Front Device Bay The Installation of the 3. 5" front device is the same as the installation of the 5. 25" front devices. Please refer to step 4-6. Required parts: none 4-8 Installation of 3. 5" Internal Device Bay This chassis provides built-in bays to accommodate up to 5 hard disc drives (after removal of the tool enclosure). The HDD requires securing runners, which can be found in the tool enclosure. 4-8-1 Place the runners on both sides of the HDD. Slide the HDD into the hard disk bay evenly. 4-8-2 For installations of the fourth and fifth HDDs, loosen the tool enclosure, and then install the HDD in accordance with step 4-8-1. 4-8. 1 4-8. 2 10 English 4-9 Installation of 2. 5" Enclosure 4-9. 1 Connect the 4-pin power cable to the 5. 25" front device housing 4-pin power port. [. . . ] Slide the HDD into the hard disk bay evenly. 4-8-2 For installations of the fourth and fifth HDDs, loosen the tool enclosure, and then install the HDD in accordance with step 4-8-1. 4-8. 1 4-8. 2 10 English 4-9 Installation of 2. 5" Enclosure 4-9. 1 Connect the 4-pin power cable to the 5. 25" front device housing 4-pin power port. 4-9. 2 Connect the SATA cable from the e-SATA side to the SATA port on the motherboard. [. . . ]