User manual GIGABYTE ISOLO 210

[. . . ] (http://www. gigabyte. com. tw) The following are not covered by the warranty: 1. Using the product incorrectly or in a manner other than the designed purpose. [. . . ] Installation Instruction 4-1 Installation of Power Supply 4-2 Installation of Motherboard 4-3 Installation of Add-on Card 4-4 Installation of Front Multi-Media I/O port 4-5 Connection of Fan Power Cables 4-6 Installation of 5. 25" Front Device Bay 4-7 Installation of 3. 5" Front Device Bay 4-8 Installation of 3. 5" Internal Device Bay 4-9 Foot Supports 4-10 Liquid Cooling System Support 4-11 Recommended Cooling Products 3 4 5 5 6 7 8 8 8 9 10 11 11 12 12 13 13 14 English 1. Components Introduction 1-1 Casing's Internal Structure Power Supply Bay PCI Tool-Free Fastener 5. 25" Front Device Bay Motherboard tray 3. 5" Front Device Bay 3. 5" Internal Device Bay Accessory Box Accessory Box (Refer to the figures below for the attachments in the accessory box) Securing Runner x 6 Copper Stand Off x9 Motherboard Securing Screw x 9 Power Supply Securing Screw x 4 Large Wire Clamp x2 Mini Wire Clamp x3 Magnet Ring x 1 Dust Remover Cloth Front Cable Kit (Refer to the figures below for the cable connectors) USB 2. 0 Audio Set (HD & AC'97) IEEE1394 (Multi-connectors) Front Light 4-Pin Power Connector 3-Pin Fan Connector Power SW/Speaker Connector English 1-2 Front, Rear, and Left Side Panel Structure a) Left Side Panel b) Front Panel Ventilated Mesh Side Panel Kit Left Side Panel Power Switch and Front Multi-Media I/O port c) Rear Panel Rear Fan LCS Tube Outlets 1-3 Removal of Side and Front Panels 1-. 1 To remove side panels: 1-3. 1a Remove the 4 thumb screws at the rear of the side panel, and detach the side panels. 1-. To remove front panel: 1-3. 2a Remove the left and right side panels, release the 4 clamps that hold the front panel onto the chassis. English 2. Feature -High Quality Design Innovative sleek dual-tone design coupled with sophisticated yet simple, precise workmanship. Illuminated and atmospherically-soothing backlight for a post-modern classy impression. -Complete Support Complete front panel multi-media support, include 2 x USB 2. 0, 1 x IEEE1394, 1 x audio set (HD & AC97) Full Support of Gigabyte Tech. thermal solution LCS and Air cooling products lines Support ATX / Micro ATX / Flex ATX motherboard. -Integration of Cooling Technology Intergrated Ventilated Mesh side panel. -Convenience of assembly Internal Cable Management ­ provides users with a clean assembly environment. Tool-free installation design. English 3. Specifications Model: Case Type: Size: Front Bezel Material: Color: Side Panel: Body Material: Net weight: 3. 5 drive bay (external): 3. 5 drive bay (internal): PCI slot: Motherboard size: System Fan (Front): System Fan (Rear): Multi-Media I/O port: GZ-AA1CB-SNS/SNB/SNG Middle Tower 200 x 440 x 485mm (W x H x D) Aluminum Silver/Black/Metallic Grey Ventilated Mesh SECC 8. 5KG / 10. 5KG 2 3 7 ATX / Micro ATX / Flex ATX 12cm silent cooling fan x 1 12cm silent cooling fan x 1 2 x USB 2. 0 / 1 x IEEE1394 / 1 x Audio Set 5. 25" drive bay (external): 5 English 4. Installation Instruction Please follow the reference sections in order for installation 4-1 Installation of Power Supply To facilitate the installation, it is recommended to place the chassis upright on the table. Required Tools: Power supply securing screw x 4; Cross screwdriver. Remove side panel (see step 1-3. 1 on page 5). Place the power supply into the power supply bay. 4-1. 1 4-1. 2 Use the 4 x securing screws to secure the power supply to the rear of the chassis. 4-2 Installation of Motherboard The iSolo 210 can support ATX / Micro ATX / Flex-ATX motherboards. Please confirm the dimension and specifications of the motherboard before installation. Required Tools: Cross screwdriver, Copper stand offs x 9 and Motherboard screws x 9. [. . . ] The built-in HDD requires securing runners, which can be found in the accessory box. Required tools: Securing runners (2 per hard disc drive) 1 English 4-8. 1 Fit the securing runners on both sides of the HDD and slide the HDD into the internal drive bay. Additional HDD can be installed in the 3. 5" front device bay. [. . . ]