User manual GIGABYTE MA9DP

[. . . ] To notify any person of such revision or changes. E1 G-MAX TM Micro ATX Series User's Manual Preface This system unit is designed to be stable, safe, and easy to use. The system can be upgraded and expanded in function easily if correct procedure is followed. For your own safety and to avoid accidental damage to your system, please ensure you follow the following precautions: Follow all the warnings and instructions marked on the products. [. . . ] Chassis Dimension 405(D)mm x 180(W)mm x 352(H)mm This chassis is made with material complied with UL specification and designed for space saving and easy open with thumbscrew. There are two 5. 25" and three 3. 5" drive bays. This chassis complies with corresponding EMC and safety regulations. Motherboard See Motherboard Manual for details. Power Supply The ATX switching power supply included with this product supports soft off function. Hence, the system can be shut down automatically. Note: Please check the voltage requirements in the country you reside before turning on the PC. System Component Installation Remove the screws of the side cover of the chassis, push backward to dismount the cover. Remove front panel CPU 1. Before installation, lift up the lever and align the cut of the CPU with the marking on the socket. Pull down the lever to lock the CPU on the socket after installation. When you are installing the heat sink, please make sure to keep the heat sink tight against the CPU to obtain the best cooling result. Apply the thermal compound to one side of the template, and ensure the compound is spread evenly across the template and repeat if necessary. E4 G-MAX TM Micro ATX Series User's Manual 4. Connect fan power connector to the CPU FAN connector on the motherboard. For Intel Pentium 4 processors CPU Pin Lever Apply thermal grease to the top of the CPU properly. Click the heat sink locker to the motherboard retention module. For AMD Althlon CPU Pin TM and AMD DuronTM processors Lever Apply thermal grease to the top of the CPU properly. Install fan on top of CPU Click the heat sink locker to the motherboard retention module. Set CPU clock frequency from BIOS Setup, see Motherboard Manual for details. E5 G-MAX Memory TM Micro ATX Series User's Manual Notches at sides of module SDRAM Position notches. [. . . ] For those models with front audio module: B. If you use microphone for recording, please insert it in the Front Audio Port. *LINE OUT *USB Hub *MIC IN G-MAX TM Micro ATX Front Audio Port P. E10 G-MAX Rear Panel Power Inlet Voltage Switch Keyboard Port (PS/2) COM Port COM Port / VGA Port Audio Out Audio In MIC In USB Hub TM Micro ATX Series User's Manual Mouse Port (PS/2) LPT Port Game Port LAN Port *1394 Port Note 1. To avoid breaking disc during high-speed operation, we recommend you to use high quality CD/ Recordable CD/ Re-writable CD. 2. Specification with " " mark are subject to change without notice. [. . . ]