User manual GIGABYTE MD30-RS0 ANNEXE 2

[. . . ] 1001 Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors Copyright © 2014 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations:  For detailed product information, carefully read the User's Manual. For more information, visit our website at: http://b2b. gigabyte. com You are a professional? [. . . ] Default setting is UEFI. - 52 - BIOS Setup 2-2-5 Post Report Configuration Post Report Configuration Error Message Report Post Error Message Enable/Disable Info Error Message support. Default setting is Enabled. BIOS Setup - 53 - 2-2-6 Trusted Computing Configuration Security Device Support Select Enabled to activate TPM support feature. Display current TPM status information. Current Status Information - 54 - BIOS Setup 2-2-7 USB Configuration USB Configuration USB Devices: XHCI Hand-off Display the USB devices connected to the system. Enable/Disable XHCI (USB 3. 0) Hand-off support. Enable/Disable EHCI (USB 2. 0) Hand-off function. Enable/Disable USB Mass Storage Driver Support. Enable I/O port 60h/64h emulation support. This should be enabled for the complete USB Keyboard Legacy support for non-USB aware OS. Default setting is Enabled. EHCI Hand-off USB Mass Storage Driver Support(Note) Port 60/64 Emulation (Note) This item is present only if you attach USB types of device. - 55 - BIOS Setup 2-2-8 Chipset Configuration Restore on AC Power Loss (Note) Defines the power state to resume to after a system shutdown that is due to an interruption in AC power. When set to Last State, the system will return to the active power state prior to shutdown. When set to Stay Off, the system remains off after power shutdown. Options available: Last State/Stay Off/Power On. The default setting depends on the BMC setting. Configure ystem fan curve mode Options available: Full Dpeed Mode/Performance ModeBalanced mode/Energy Saving Mode. Enable/Disable Chassis intrusion alter funtion. Default setting is Disabled. Deep Sleep (EuP) Fan Curve Mode Chassis Opened Warning (Note) When the power policy is controlled by BMC, please wait for 15-20 seconds for BMC to save the last power state. - 56 BIOS Setup 2-9 SIO Configuration BIOS Setup - 57 - BIOS Setup - 58 - AMI SIO Driver Version Super IO Chip Logical Device(s) Configuration [*Active*] Serial Port 1/2 [*Active*] PS2 Keyboard [*Active*] PS2 Mouse Press [Enter] for confuguration of advanced items. Press [Enter] for confuguration of advanced items. Press [Enter] for confuguration of advanced items. Display the AMI SIO driver version information. Serial Port 1 Configuration Use This Device Logical Device Settings: Current: When enabled allows you to configure the serial port 1 settings. When set to Disabled, displays no configuration for the serial port. Default setting is Enabled. Display the Serial Port 1 base I/O addressand IRQ. - 59 - BIOS Setup Possible: Configure Serial Port 1 base I/O addressand IRQ. [. . . ] BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Configuration Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. " Press the numberic keys to input the desired value. Enable or Disable Bootup NumLock function. Enables or disables showing the logo during POST. [. . . ]