User manual GIGABYTE MD90-FS0

[. . . ] Gigabyte Server Management Console Installation and Configuration Guide Rev. 1. 0 Copyright © 2014 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. [. . . ] When you finish the configuration, click Update. To re-configure the power limit value, click Deactivate. IPv6 Configuration Parameter IPv6 Configuration Decription/Resulting Action Enable/Disable IPv6 Configuration. When you finish the configuration, click Update. - 27 - Gigabyte Server Management Console 2-2-2 Group Info Group Info displays the Grouped Node List information of current remote client system. How to Create a Group 1. Check the box of the node you want to create to a new group. 2. Select New Group from the drop-down list. 3. Define new group name in the respective column. 4. When finish configuration, click Update. Gigabyte Server Management Console - 28 - How to Add a Node to Specified Group 1. Check the box of the node you want to add to the specified group. 2. Select the specified group from the drop-down list. 3. When finish configuration, click Update. How to Delete a Node from Group 1. Check the box of the node you want to delete. 2. Select the Delete Group from the drop-down list. 3. When finish configuration, click Update. - 29 - Gigabyte Server Management Console How to Reset Group 1. Select the Reset Group from the drop-down list. 2. When finish configuration, click Update. Gigabyte Server Management Console - 30 - 2-2-2-1 Group Management Parameter Node Member SEL Decription/Resulting Action Displays the connected Node ID information. Click on selected ID to view the Node health information. Displays the connected Node SEL information. Click Refresh to update current group SEL. Displays the grouped Node FRU information. Click Refresh to update current Node FRU LIST. Chassis Power Control: Power control function to power on/off/cycle and hard reset the remote host system. When you finish the configuration, click Apply. Click Refresh to update current system power control status. Set Chassis Identify: Define timeout to power on or power off the system. Define the timeout from the drop-down list, when you finish the configuration, click ON to power on system. Click OFF to power off system. Node Detail Chassis - 31 - Gigabyte Server Management Console Sensor Trap IP Destination Platform Events BMC Update Displays the status of node power consumption/fan speed/temperature. [. . . ] Click Clear all database to reset all database to default status. Please note that all recorded logs will be cleaned when this function is activated. License License Parameter Decription/Resulting Action Displays all licensed information. Gigabyte Server Management Console - 36 - 2-2-6 SNMP Trap Parameter Formatted timestamp Agent address Description Decription/Resulting Action Displays the time when trap is sent by connected node. Describes the type of errors or logs. - 37 - Gigabyte Server Management Console Chapter 3 Appendix Description Network is not connected or BMC is busy. Network is not connected or node management related command failed too many times. [. . . ]