User manual GIGABYTE MNIC8CI

[. . . ] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1-4 Back Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 -3- MNIC8CI Motherboard Layout 1 2 3 4 5 6 7 8 43 41 40 39 37 35 33 38 36 34 32 31 30 29 28 27 v 9 10 13 15 17 18 19 41 42 11 12 14 16 20 26 25 24 23 22 21 -4- Item 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 AUDIO_JACK LPT RJ11 KB_MS1 USB_LAN1 VGA1/COM2 USB_LAN2 DC_IN DC_OUT COM4 JCOM4 VGA2 JRS1 Code Description Audio jack Parallel port Cash drawer port PS/2 connector USB ports and LAN port VGA port and Serial port USB ports and LAN port DC jack 4 pin power connector Serial cable connector Serail port 5V, 12V, RI select jumper VGA cable connector RS232, RS422, RS485 Select Connector LCD power connector System fan cable connector Back light inverter jumper LVDS connectors CPU fan cable connector Processor Inverter with box header DDR3 SO-DIMM slot SATA power connector SATA power connector SATA cable connectors SATA 7+15 pins cable connector Front panel connecotor Front USB cable connector Front USB cable connector Battery socket Front USB cable connector Mini PCI Express slot Serial cable connector Power COM select jumper Serial cable connector Power COM select jumper Serial cable connector Power COM select jumper Serial cable connector Power COM select jumper Front audio cable connector PS/2 cable connector LCDPWR_CON SYS_FAN BKLTEN_CON LVDS CPU_FAN CPU INV_BRIG1 SO-DIMM SATAPW2 SATAPW1 SATA1/2 SATA3 JFRONT F_USB3 F_USB2 BAT1 F_USB1 MINI_CARD COM6 JCOM6 COM3 JCOM3 COM5 JCOM5 COM1 JCOM1 F_AUDIO KB_MS2 -5- Chapter 1 Hardware Installation 1-1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). [. . . ] Serial Port Connects to serial-based mouse or data processing devices. (e). Video Port The video in port allows connect to video in, which can also apply to video loop thru function. (f). Parallel Port The parallel port allows connection of a printer, scanner and other peripheral devices. (g). PS/2 Port Use this port to connect a PS/2 mouse or a PS/2 keyboard. (h). RJ-11 Port The RJ-11 (Cash Drawer) port is a physical connector interface most often used for telephone wire terminals. (i). Line Out Jack (Front Speaker Out/Blue) The default Line Out (Front Speaker Out) jack. Stereo speakers, earphone or front surround speakers can be connected to Line Out (Front Speaker Out) jack. - 10 - Hardware Installation Connection/ Speed LED Activity LED Connection/Speed LED: State Orange Green Off Description 1 Gbps data rate 100 Mbps data rate 10 Mbps data rate Activity LED: State Description Blinking Data transmission or receiving is occurring Off No data transmission or receiving is occurring LAN Port • When removing the cable connected to a back panel connector, first remove the cable from your device and then remove it from the motherboard. • When removing the cable, pull it straight out from the connector. Do not rock it side to side to prevent an electrical short inside the cable connector. - 11 - Hardware Installation 1-5 Internal Connectors 7 9 6 31 1 2 23 22 21 20 33 18 19 32 17 16 12 13 27 26 25 24 5 3 4 34 8 28 29 30 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 15 DC_OUT F_AUDIO JRS1 SYS_FAN CPU_FAN VGA2 KB_MS2 LVDS INV_BRIG1 SATA2 SATA1 SATAPW_1 SATAPW_2 SATA3 JFRONT F_USB3 F_USB2 F_USB1 14 11 10 19) 20) 21) 22) 23) 24) 25) 26) 27) 28) 29) 30) 31) 32) 33) 34) BAT1 COM6 COM3 COM5 COM1 JCOM6 JCOM3 JCOM5 JCOM1 COM4 LCDPWR_CON BKLTEN_CON JRS2/JRS3/JRS4/JRS5 CLR_CMOS1 USB_PWR1/USB_PWR2/USB_PWR3 LVDS_PWR1 Hardware Installation - 12 - Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer. Unplug the power cord from the power outlet to prevent damage to the devices. • After installing the device and before turning on the computer, make sure the device cable has been securely attached to the connector on the motherboard. - 13 - Hardware Installation 1) DC_OUT (2x2 12V Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, first make sure the power supply is turned off and all devices are properly installed. The power connector possesses a foolproof design. Connect the power supply cable to the power connector in the correct orientation. The 12V power connector mainly supplies power to the CPU. If the 12V power connector is not connected, the computer will not start. To meet expansion requirements, it is recommended that a power supply that can withstand high power consumption be used (500W or greater). If a power supply is used that does not provide the required power, the result can lead to an unstable or unbootable system. Pin No. 1 2 3 4 Definition GND GND +12V +12V 1 2 3 4 2) VFD_JR1 (VFD & RS232 Mode Select Jumper) 1 5 2 6 VFD Mode RS232 Mode VFD_JR1: 1-2, 3-5, 4-6 Close JCOM4: 5-6 Close VFD_JR1: 1-3, 2-4 Close JCOM4: 1-2 or 3-4 Close Hardware Installation - 14 - 2) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Definition audio (HD) and AC'97 audio. You may connect your chassis front panel audio module to this header. 1 2 3 4 5 Definition 12V Power 12V Power GND Backlight Controller Backlight Enable 1 10/11) SATA1/2 (SATA 3Gb/s Connectors) The SATA connectors conform to SATA 3Gb/s standard and are compatible with SATA 1. 5Gb/s standard. Each SATA connector supports a single SATA device. SATA2 7 SATA1 7 Pin No. [. . . ] date information and BIOS configurations) and reset the CMOS values to factory defaults. To clear the CMOS values, place a jumper cap on the two pins to temporarily short the two pins or use a metal object like a screwdriver to touch the two pins for a few seconds. 1 1-2 Close: Clear CMOS data) 2-3 Close: Normal operation (Default setting) 1 • Always turn off your computer and unplug the power cord from the power outlet before clearing the CMOS values. • After clearing the CMOS values and before turning on your computer, be sure to remove the jumper cap from the jumper. Failure to do so may cause damage to the motherboard. [. . . ]