User manual GIGABYTE R160-S34

[. . . ] 1. 0 Dual LGA2011 sockets R3 motherboard for Intel® E5-2600 V3 series processors Copyright © 2014 GIGA-BYTE TECHNOLOGY CO. , LTD. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to the specifications and features in this manual may be made by GIGABYTE without prior notice. No part of this manual may be reproduced, copied, translated, transmitted, or published in any form or by any means without GIGABYTE's prior written permission. Documentation Classifications In order to assist in the use of this product, GIGABYTE provides the following types of documentations:  For detailed product information, carefully read the User's Manual. For more information, visit our website at: http://b2b. gigabyte. com You are a professional? [. . . ] When this item is set to 'Disable Link, the system will operate power save feature for those unpopulated PCI Express links. Options available: Keep Link ON/ Disable Link. Default setting is Keep Link ON. Unpopulated Links BIOS Setup - 52 - 5-2-3 Network Stack Network stack Enable/Disable UEFI network stack. Press <+> / <-> keys to increase or decrease the desired values. Press <+> / <-> keys to increase or decrease the desired values. Ipv4 PXE Support(Note) Ipv6 PXE Support(Note) PXE boot wait time(Note) Media detect time(Note) (Note) This item appears when Network Stack is set to Enabled. - 53 - BIOS Setup 5-2-4 CSM Configuration Compatibility Support Module Configuration CSM Support Enable/Disable Compatibility Support Module (CSM) support. Upon Request: GA20 can be disabled using BIOS services. Always: Do not allow disabling GA20; this option is useful when any RT code is executed above 1MB. Options available: Force BIOS/Keep Current. Enabled: Allowed headless retry boot Options available: Enabled/Disabled. Determines which devices system will boot to. Options available: UEFI and Legacy/Legacy only/UEFI only. Default setting is UEFI and Legacy. CSM16 Module Version Gate20 Active Option ROM Messages INT19 Endless Retry Boot option filter BIOS Setup - 54 - Option ROM execution Network Controls the execution UEFI and Legacy PXE OpROM. Options available: Do not launch/UEFI/Legacy. Default setting is Legacy. Storage Controls the execution UEFI and Legacy Storage OpROM. Options available: Do not launch/UEFI/Legacy. Default setting is Legacy. Video Controls the execution UEFI and Legacy Video OpROM. Options available: Do not launch/UEFI/Legacy. Default setting is Legacy. Other PCI devices Determines OpROM execution policy for devices other than network, Storage, or Video. Default setting is UEFI. - 55 - BIOS Setup 5-2-5 Post Report Configuration Post Report Configuration Error Message Report Post Error Message Enable/Disable Info Error Message support. Default setting is Enabled. BIOS Setup - 56 - 5-2-6 Trusted Computing Configuration Security Device Support Select Enabled to activate TPM support feature. Display current TPM status information. Current Status Information - 57 - BIOS Setup 5-2-7 USB Configuration USB Configuration USB Devices: XHCI Hand-off Display the USB devices connected to the system. [. . . ] Press [Enter] to load additional db from a storage devices. Set new DB Append aVar to DB Forbidden Signature Database (DBX) Delete the DBX Set DBX from File Append Var to DBX - 114 - BIOS Setup 5-6 Boot Menu The Boot menu allows you to set the drive priority during system boot-up. BIOS setup will display an error message if the legacy drive(s) specified is not bootable. Boot Configuration Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. " Press the numberic keys to input the desired value. Enable or Disable Bootup NumLock function. [. . . ]