User manual GIGAFAST EE400-RP

[. . . ] User' Manual s U-011-03E0-000516 Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated into any language, or transmitted in any form or by any means, mechanical, magnetic, electronic, optical, photocopying, manual, or otherwise, without the prior written permission. Trademarks All product, company, brand names are trademarks or registered trademarks of their respective companies. They are used for identification purpose only. Specifications are subject to be changed without prior notice. -1- FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against radio interference in a commercial environment. [. . . ] WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one from the following four options: A. Static IP Address: ISP assigns you a static IP address. Dynamic IP Address: Obtain an IP address from ISP automatically. PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services. Dial-up Network: To surf the Internet via PSTN/ISDN. -18- 4. 4. 1 Static IP Address WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting value provided by your ISP. Required by some ISPs, for example, @Home. Renew IP Forever: this feature enable this product renew IP address automatically when the lease time is being expired even the system is in idle state. PPPoE Account and Password: the account and password your ISP assigned to you. If you don't want to change the password, keep it empty. Input the service name if your ISP requires it. Maximum Idle Time : the time of no activity to disconnect your PPPoE session. Dial-up Telephone, Account and Password : assigned by your ISP. If you don't want to change the password, keep it empty. Primary and Secondary DNS: automatically assigned if they are configured as "0. 0. 0. 0. " 3. Maximum Idle Time: the time of no activity to disconnect your dial-up session. Baud Rate: the communication speed between this product and your MODEM or ISDN TA. Extra Setting: needed to optimize the communication quality between the ISP and your MODEM or ISDN TA -19- 4. 5 DHCP Server The settings of TCP/IP environment include Host IP, Subnet Mask, Gateway, and DNS configurations. It is not a simple task to correctly configure all the computers in your LAN environment. Fortunately, DHCP provides a rather simple approach to handle all these settings. This product supports the function of DHCP server. If you enable this product' s DHCP server and configure your computers as "automatic IP allocation" mode, then when your computer is powered on, it will automatically load the proper TCP/IP settings from this product. [. . . ] The connection parameters should be set to 19200 8-N-1. When the M1 indicator starts flashing regularly, you can press the "Enter" key of the keyboard several times, there should be some messages and console prompt ">" appeared in the terminal. In the console mode, you may reset the IP address and the system password of this product. Please remember to execute the SR command to save the changes you have made. [. . . ]