Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Lastmanuals provides you a fast and easy access to the user manual GIGAFAST EE500-S. We hope that this GIGAFAST EE500-S user guide will be useful to you.
Lastmanuals help download the user guide GIGAFAST EE500-S.
Detailed instructions for use are in the User's Guide.
[. . . ] Indeed, with its easy to use plug-and play installation and outstanding performance at HUB price. It also provides a detailed LED indicator display the Power, Link/ Activity, 100M and full duplex for monitoring your network simple and easy!
1
About this Manual
This manual briefly explains how to install and use this 5/8/16 Ports 10/100Mbps Fast Ethernet Switch.
Package Contents:
One 5/8/16 ports 10/100Mbps Fast Ethernet Switch
(As you purchased) One power adapter or power cord. One set of rack-mounting kits (For 16 ports switch) User's Guide
Power requirement
5/8 Ports Switch: DC 5V 3Amp 16 ports Switch: 100-240VAC at 50Hz ~ 60Hz. [. . . ] Use a cross-head screwdriver to attach the brackets to the side of the switch. Position the switch in the rack by lining up holes in the brackets with the appropriate holes on the rack, and then use the supplied screws to mount the switch in the rack. Plug the power cord or adapter into the power socket at the switch and the other end to the power outlet. Check if the Power LED on the front panel is on. Connect workstations to switch using Category 3, 4 or 5 UTP/STP cables for 10Mbps or Category 5 cables for 100Mbps Fast Ethernet Connection. For convenience, we suggest you use Category 5 cables for all operation.
5 6. Verify network operation: Verify that all attached devices have a valid connection. The switch monitors the link status for each port. If any device is properly connected to the switch and transmitting a link beat signal, the Link indicator will light up for the corresponding port. If the Link indicator fails to light when you connect a device to the switch, check the following items: a. Be sure all network cables and connectors are properly attached to the connected device and the switch. Both sides of each connection must use the same transmission mode. The switch can use autonegotiation to set both speed and mode. However, full duplex can only be supported if the attached device also uses auto negotiation. [. . . ] These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the user's guide, may cause interference in which case user will be required to correct the interference at his own expanse. However, there is no guarantee that interference will not occur in a particular installation. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE GIGAFAST EE500-S
Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software : user guide, owner's manual, quick start guide, technical datasheets... In any way can't Lastmanuals be held responsible if the document you are looking for is not available, incomplete, in a different language than yours, or if the model or language do not match the description. Lastmanuals, for instance, does not offer a translation service.
Click on "Download the user manual" at the end of this Contract if you accept its terms, the downloading of the manual GIGAFAST EE500-S will begin.
