User manual GMC YUKON

[. . . ] Congratulations on your purchase of a GMC Yukon or Yukon Denali. Please read this information and your Owner Manual to ensure an outstanding ownership experience. Note that your vehicle may not include all the features described in this booklet. Place this booklet in your Owner Manual portfolio for easy reference. INSIDE YOUR VEHICLE Instrument Panel . [. . . ] · Press the HR (down) arrow until the correct hour appears on the display. · Press and hold the MIN (up) arrow until the correct minute appears on the display. Set the time on radios with a Radio Data System (RDS) Your radio may have a button marked "H" or "HR" to represent hours and an "M" or "MIN" to represent minutes. · Press and hold the hour button until the correct hour appears on the display. · Press and hold the minute button until the correct minute appears on the display. Note: The time may be set with the ignition on or off. Program radio station presets · Turn the radio on. · Press BAND to select the band (AM, FM1/FM2/XM1/XM2). · Use the seek or tune knob to tune in the desired station. · Press AUTO EQ or AUTO TONE (as applicable to your radio) to select the equalization that best suits the type of station selected. · Press and hold one of the six numbered buttons until a beep sounds; release the button. · Repeat these steps for each station preset, using a different numbered button for each station. Access one of the two available XM Satellite Radio bands (if equipped) · Press the BAND button until XM1 or XM2 appears on the display. (Note: Requires subscription to XM Radio. ) 8 Getting to Know Your Yukon/Yukon Denali Play a CD · Option 1: Select the number for the CD desired (wait eight seconds). · Option 2: Press 5/SIDE button on radio face to scroll through CDs. Select CD Track · Option 1: PREV/NEXT on radio. · Option 2: SEEK arrows on radio. · Option 3: SEEK arrows on steering wheel. B A Six-Disc CD Changer (if equipped) Loading/Unloading Quick Load · Press LOAD ("A" above) for approximately three seconds. · Wait for amber lights to flash on sides of slot ("B" above) before inserting CD. The next available number will flash and accept another CD until all are occupied. · To exit Quick Load, press either a number with a CD in it or LOAD. Quick Unload · Press EJECT ( ) for approximately three seconds; all CDs will eject from highest number to lowest. Load 1 CD · Press LOAD; all available numbers will flash amber. · Wait for amber lights to flash on sides of slot before inserting CD. [. . . ] Curb View Both The Curb View Assist feature automatically tilts your outside mirrors downward to allow you to see curbs when backing up. Set Curb View Assist position · Enable one of the four selections above. · Adjust the mirrors while the vehicle is in reverse. When the vehicle is shifted out of reverse, your selection is saved in Memory 1 or 2. Note: Memory 1 or 2 is dependent on the RKE transmitter being used and the key being in the ignition during programming. See Section 2 of your Owner Manual. Perimeter Lighting Options 1. [. . . ]